Abstract:P2-type layered Na0.67MnO2 has been considered to be a promising candidate cathode material for sodium ion batteries. Nevertheless, the undesired phase transitions during operation and the large Na+ radius induced sluggish ion diffusion remain the stumbling blocks to realize its high performance. Herein, we propose a Zn/Mg co-doping strategy, which is proved to have bifunctional effects. First, relative to the pristine P2-Na0.67MnO2 and the single-ion (Zn/Mg) doped samples, the Zn/Mg dual-doped P2-Na0.67MnO2 demonstrates a lower Mn3+/Mn4+ ratio and a higher lattice O content, which facilitate the structural stability of the cathode material. More intriguingly, the Zn/Mg co-doping gives rise to enlarged interplanar spacing, which provides spacious ion diffusion channels for fast Na+ intercalation/extraction. As a result, the Zn/Mg dual-doped sample exhibits a high Na+ diffusion coefficient and a solid-solution reaction during charge/discharge, with a cell volume change determined to be only 0.55%. Taking advantages of the above favorable features, the Zn/Mg dual-doped P2-Na0.67MnO2 demonstrates a high rate performance with 67.2 mAh·g−1 delivered at 10 C and a decent cycling stability with a capacity retention of 93.8% achieved at 1 C after 100 cycles. This work introduces the Zn/Mg co-doping strategy to simultaneously improve the cycling stability and rate capability of P2-Na0.67MnO2, which may offer a promising avenue for further performance enhancement of the layered Na-ion batteries cathode materials.

Sodium-Storage Performance of K<SUP>+</SUP>-Intercalated Na<sub>x</sub>Cu<sub>0.2</sub>Mn<sub>0.8</sub>O<sub>2</sub>

Designing High-Performance Nanostructured P2-type Cathode Based on a Template-free Modified Pechini Method for Sodium-Ion Batteries

Designing Water/air-Stable P2-layered Cathodes with Delayed P2–O2 Phase Transition by Composition and Structure Engineering for Sodium-Ion Batteries at High Voltage

Cu-substitution P2-Na0.66Mn1-Cu O2 sodium-ion cathode with enhanced interlayer stability

Orthorhombic Na2/3Cu0.1Mn0.9O2 cathode: Enhanced Na storage performances with the suppressed Mn–O bond anisotropy

K-doped P2-Na0.67−xKxNi0.33−yMn0.67CuyO2 cathode material with enhanced cycle performance for sodium-ion batteries

A Stable Layered Oxide Cathode Material for High‐Performance Sodium‐Ion Battery

Expanded K0.37Fe0.04Al0.07Mn0.89O2 Layered Material as a High-Performance Cathode in Sodium-Ion Batteries

Improving the structural and cyclic stabilities of P2-type Na 0.67 MnO 2 cathode material via Cu and Ti co-substitution for sodium ion batteries.

Fast and highly reversible Na+ intercalation/extraction in Zn/Mg dual-doped P2-Na0.67MnO2 cathode material for high-performance Na-ion batteries

Cu-Doped Spherical P2-Type Na0.7Fe0.23- xCu x Mn0.77O2 Cathode for High-Performance Sodium-Ion Batteries

Sodium‐Rich, Co‐Ni‐Free P2‐Layered Manganese Oxide Cathodes for Sodium‐Ion Batteries

Interface-rich mixed P2 + T phase NaxCo0.1Mn0.9O2 (0.44 ≤ x ≤ 0.7) toward fast and high capacity sodium storage

Stabilizing oxygen redox reaction in phase-transition-free P2-type Co/Ni-free cathode via Cu doping for sodium-ion batteries

Optimal Synthesis and New Understanding of P-2-type Na2/3Mn1/2Fe1/4Co1/4O2 As an Advanced Cathode Material in Sodium-Ion Batteries with Improved Cycle Stability

Cu-Doped Spherical P2-Type Na0.7Fe0.23-x Cu X Mn0.77O2 Cathode for High-Performance Sodium-Ion Batteries

Cu-doped layered P2-type Na0.67Ni0.33-xCuxMn0.67O2 cathode electrode material with enhanced electrochemical performance for sodium-ion batteries

Construction nasicon-type NaTi2(PO4)3 nanoshell on the surface of P2-type Na0.67Co0.2Mn0.8O2 cathode for superior room/low-temperature sodium storage

Cu-Doped Spherical P2-Type Na0.7Fe0.23-xCuxMn0.77O2 Cathode for High-Performance Sodium-Ion Batteries.

High-Operating Voltage, Long-Life Layered Oxides for Sodium Ion Batteries Enabled by Cosubstitution of Titanium and Magnesium