Abstract:The characteristics of geotechnical engineering related structure such as tunnels, foundations and retaining walls are as follows: (1) The structure is normally buried underground and visual inspection of the health condition is not possible in most cases. (2) Due to the complicated geological and hydrological conditions, a number of uncertainties are involved in the design and construction of geotechnical structures. (3) Some of the geotechnical structures are super long and large. Therefore, the requirements of real-time and long-distance monitoring of these geo-structures are of great importance. Some key geo-structures such as large-span tunnel, underground facilities and foundations require the measurement accuracy in the order of micron or millimeter. Hence the conventional monitoring techniques cannot meet the demands for geo-structure health monitoring.Brilliouin Optical Time Domain Reflectometry/Analysis (BOTDR/A) is a fully distributed measurement technique, which utilizes Brilliouin spectroscopy and Optical Time Domain Reflectometer/Analyzer to measure strains generated in optical fibers as distributed in the longitudinal direction. Fiber Bragg Grating (FBG) is a qusai-distributed monitoring technique, which is a type of distributed Bragg reflector constructed in a short segment of optical fiber that reflects particular wavelengths of light and transmits all others. The reflected wavelength is proportional to the applied strain and temperature and the FBG sensor can therefore be used as a strain or temperature sensor. Because of the distinctive characteristics of the distributed optical fiber sensing technologies, they have been paid more and more attention and began to be used to construct monitoring systems of various geo-structures such as tunnels, embankments and soil nailed slopes. In this paper, the operation principles and merits of BOTDR/A and FBG are introduced; their application feasibility on the geo-structure health monitoring are analyzed based on the authors' research achievements and application cases; the related topics about application of BOTDR/A and FBG are discussed in detail, which include the installation methods of optical fiber, the impact of distance, temperature and humidity resolution on measurement results, the fatigue effect of optical fiber, the conversion from strain to deformation and the establishment of intelligent monitoring system. The research results show that the distributed optical fiber sensing technologies are quite applicable to the geo-structure health monitoring.

Monitoring of Ice Coating Thickness of Tight-buffered OPGW Based on Brillouin Optical Time Domain Reflectometer

OPGW cable icing status monitoring based on BOTDR

The Detecting System and Method of Quasi-Distributed Fiber Bragg Grating for Overhead Transmission Line Conductor Ice and Composite Insulator Icing Load

The study on prestressed cable stress based on Brillouin-optictime optic fiber sensor

Health monitoring of electric power communication line using a distributed optical fiber sensor

Ice structure monitoring with an optical fiber sensing system

Modeling Analysis of the Temperature Transfer of OPGW under Ice Coating

Measuring geo-grids stress using distributed fiber-optic sensors based on pulse-prepump-Brillouin optical time domain analysis

Monitoring of Metro-Tunnel Freezing Construction Using Fiber Sensing Technology

A Novel Method of Embedding Distributed Optical Fiber Sensors for Structural Health Monitoring

Research on Optical Fiber Composite Overhead Wire (OPGW) Lightning Monitoring Technology Based on Weak Fiber Bragg Grating Array

Study on Real-Time Reinforcement Stress Measurement Based on Brillouin Optical Time Domain Analysis

Icing Monitoring System Based On Fiber Bragg Grating Sensor For Overhead Transmission Lines

Anti-icing Performance Evaluation of OPGW Based on BOTDA and OTDR

Application of Distributed Optical Fiber Strain Measurement into Geotechnical Engineering Monitoring

The Feasibility Study of Monitoring System of Icing on Transmission Line Based on Fiber Optic Sensor

Performances of Distributed Fiber Optic Strain Sensor with Thin-Walled Ring

Detection of Glaze Icing Load and Temperature of Composite Insulators Using Fiber Bragg Grating

Optical Fiber Sensing Structure for Slope Monitoring Based on Brillouin Optical Time Domain Reflectometer

Monitoring the stress of the post-tensioning cable using fiber optic distributed strain sensor

Research on Monitoring Method for Ice-Covered State of Transmission Lines Based on Conductor End Displacement