Abstract:Injection molding is one of the polymer molding methods. Product quality mainly can be affected by temperature and pressure. To observe the process of the melt forming in the mold, it is required to monitor the signal with the sensor. To achieve the purpose of robust molding, this research provides a new design-process window architecture based on machine learning of the injection product quality assessment. The process window is also known as the forming area map. The monitored value for defective products will be above or below the variable limit. The process is set to the center of this window so that any variation within the window will still result in an acceptable product. There are some potential problems in the current process. First, the conventional process window uses a small number of process variables as monitoring indicators, and it cannot provide stronger monitoring indicators. Second, most of the conventional process windows are 2-D and there are many monitoring windows, so the information that can be monitored is limited. Therefore, product quality cannot be effectively monitored without proper selection of important factors. Finally, the current process window can only provide information in the process and cannot make product quality prediction. In order to solve the above problems, a machine learning method is proposed to design the process window. The random forest classifier and regressor are used to predict the product quality. In order to improve the usability of the factor, the design of the proposed new variable is derived from the classical formula of thermodynamics (heat conduction). Using existing factors and proposing time-based feature changes can better represent the molding process as a whole. Based on the experimental results, the proposed variables can effectively increase the predictive performance of random forest model for quality assessment. The research results make a satisfactory result to the quality assessment of industria- injection molding. The accuracy of the prediction results is 100%. Moreover, it can be found from the 3-D process window that the data are very concentrated and can be clearly classified by the hyperplane, which is defined as the shortest distance between two clusters, and this space is the boundary of the process window. Therefore, compared with the past, the judgment boundary based on the random forest process window is no longer a simple boundary. Random forests can provide more accurate visualization boundaries.

An Adaptive Weighted Envelope Based Piecewise Fitting Method for Molding Process Data

Pre-joining Process Planning Model for a Batch of Skin–stringer Panels Based on Statistical Clearances

Modeling of Fast Pre-Joining Processes Optimization for Skin-Stringer Panels

Quality Control in the Polypropylene Manufacturing Process: an Efficient, Data-Driven Approach

A Novel Sensing Feature Extraction Based on Mold Temperature and Melt Pressure for Plastic Injection Molding Quality Assessment

Automated Process Parameters Tuning for an Injection Moulding Machine with Soft Computing

Part weight control via model free optimization for injection molding

Small Sample Data-Driven Multi-Objective Optimization of MEMS Sensor Molding Process Parameters

Dynamic process based soft sensing of melt flow rate

Numerical analysis of molding process for roll imprinting based on ABAQUS

Mould Correction for Sheet-Metal Multi-Step Incremental Air-Bending Forming Based on Close-Loop Control and FEM Simulation

Dynamically Regulate and Control Complicated Auto Panel Uniform Forming

Multi-objective Optimization Method of Injection Molding Process Parameters Based on Hierarchical Sampling and Comprehensive Entropy Weights

The Influential Effect of Molding Parameters on Quality of Part Manufactured by Rapid Heat Cycle Molding Technology

Optimization of the Reduction of Shrinkage and Warpage for Plastic Parts in the Injection Molding Process by Extended Adaptive Weighted Summation Method

A theoretical approach based on machine learning for estimation of physical properties of LLDPE in moulding process

Research on Lightweight Injection Molding (CAE) and Numerical Simulation Calculate of New Energy Vehicle

Out-of-Mold Sensor-Based Process Parameter Optimization and Adaptive Process Quality Control for Hot Runner Thin-Walled Injection-Molded Parts

Quality prediction and control of thin-walled shell injection molding based on GWO-PSO, ACO-BP, and NSGA-II

A New Method for Fitting Car Doors Allowing for the Thermal Effects of Welding

Strategies for adjusting process parameters in CAE simulation to meet real injection molding condition of screw positions and cavity pressure curves