Abstract:The increasing rates of plastic production and waste plastic accumulation pose a serious challenge to the society, environment, and economy. Current mechanical recycling process is limited by the sorting/pretreatment of plastic waste and degradation of plastics during the process, which calls for more efficient recycling strategies. Catalytic microwave-assisted pyrolysis could serve as a feasible approach to chemical recycling of waste plastics and producing fuel and petrochemical feedstocks such as naphtha. This lecture presents a series of our recent work on the aspects of pyrolysis reactor design and catalyst development with the goal of advancing this technology towards industrial applications. A lab-scale continuous microwave-assisted pyrolysis system with a processing capacity of 200 kg plastics per day was developed, which features continuous downdraft operation and a mixing ball bed reactor. The incorporation of silicon carbide as microwave absorbents into the microwave heating process enabled fast, uniform and energy-efficient heating for the process. A baseline test of the system using conventional ZSM-5 catalyst obtained a 57 wt.% yield for C5-C22 liquid hydrocarbons from polyolefin-based plastics. Energy saving of the process compared to production of similar products from virgin materials was estimated to be 32% by using the Materials Flows through Industry supply chain analysis tool. In order the improve the yield and quality of the liquid hydrocarbon products, a series of catalysts were tested and compared on a lab-scale setting. Notably, relay catalysis of Al2O3 followed by ZSM-5 achieved up to 100% conversion into monoaromatics and C5-C12 alkanes/olefins at a catalyst to plastic ratio of 4:1; Y5.1, F20 zeolites and Al2O3 promoted the production of alkanes and alkenes mainly in the C5-C23 range; MCM-41 led to the formation of C13C23 alkanes and alkenes with a selectivity of 86.6%; ZSM-5 favored the production of aromatics with a selectivity of 70%. In addition to developing and selecting the proper catalyst material, the catalytic reactor also needs to be carefully designed such that sufficient heat and mass transfer within the catalyst bed is ensured during operation and the catalyst regeneration procedure can be conveniently practiced. Conventional designs such as the randomly packed bed could be problematic in the process since catalyst deactivation and coke/wax build-up is very likely. A probable solution to this issue is a structured catalytic reactor consisting of a structured packing with coated catalysts, e.g. ZSM-5 coatings on a SiC foam support. This structured catalyst has been tested in a lab-scale setting for upgrading pyrolytic vapours and results showed that it outperformed many other catalytic reactor designs in terms of catalytic activity and stability. In addition, the composite catalysts could be regenerated and reused while well preserving its material properties and catalytic activity after multiple reaction-regeneration cycles.

Microwave-assisted Pyrolysis of Polystyrene for Aviation Oil Production

Microwave-assisted pyrolysis of plastics for aviation oil production: energy and economic analyses

Cleaner production of aviation oil from microwave-assisted pyrolysis of plastic wastes

Conversion of Polystyrene Plastic into Aviation Fuel Through Microwave-Assisted Pyrolysis As Affected by Iron-Based Microwave Absorbents

Oil recovery from microwave co-pyrolysis of polystyrene and polypropylene plastic particles for pollution mitigation

Perspectives into Intensification for Aviation Oil Production from Microwave Pyrolysis of Organic Wastes

Microwave-assisted pyrolysis of plastic waste for liquid oil production

Microwave-assisted pyrolysis of polypropylene plastic for liquid oil production

Microwave-assisted Fluidized Bed Reactor Pyrolysis of Polypropylene Plastic for Pyrolysis Gas Production Towards a Sustainable Development

Conversion of waste polystyrene into valuable aromatic hydrocarbons via microwave-assisted pyrolysis

A review of aviation oil production from organic wastes through thermochemical technologies

Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production

Catalytic microwave-assisted pyrolysis for chemical recycling of plastic waste

A Review on the Microwave-Assisted Pyrolysis of Waste Plastics

Enhancement of fuel-grade oil yields from thermal pyrolysis of polyethylene and polystyrene through reflux condenser assisted autoclave reactor

Microwave-assisted pyrolysis of oily sludge from offshore oilfield for recovery of high-quality products

Co-pyrolysis and synergistic effect analysis of biomass sawdust and polystyrene mixtures for production of high-quality bio-oils

Microwave-assisted in-situ catalytic pyrolysis of polystyrene: Analysis of product formation and energy consumption using machine learning approach

High-quality Oil Recovered from Waste Solar Panel Through Using Microwave-Assisted Pyrolysis

A state-of-the-art review on waste plastics-derived aviation fuel: Unveiling the heterogeneous catalytic systems and techno-economy feasibility of catalytic pyrolysis

Effect of metal powder and coil on microwave pyrolysis of mixed plastic