Abstract:Introducing L12 precipitates into face-centered-cubic (FCC) structured equiatomic CoCrNi medium-entropy alloy (MEA) is an effective means to improve its disappointing strength (<450 MPa) at room temperature. Unfortunately, the L12 precipitates are usually obtained by complicated thermomechanical processing (TMP), accompanying the presence of cellular L12 precipitates at the grain boundaries (GBs) which are detrimental to the mechanical properties. In this work, we designed and fabricated a non-equiatomic Ni35Co27.5Cr27.5Al5Ti5 HEA consisting of sole spherical L12 nanoprecipitates without any other phases via a simplified short-term heat treatment processing, i.e., casting followed by homogenization and aging. The as-cast, homogenized and aged HEA all possess equiaxed grains, in the meantime, the as-cast HEA exhibits equiaxed dendritic microstructure. In the as-cast and aged HEA, spherical L12 nanoprecipitates are uniformly distributed in the FCC matrix, and the L12 nanoprecipitates of the aged HEA have smaller size and higher volume fraction in comparison with those of the as-cast HEA. The aged Ni35Co27.5Cr27.5Al5Ti5 HEA has the best mechanical properties among the three states, exhibiting a tensile yield strength of ~916 MPa, an ultimate tensile strength of ~1220 MPa, and a total elongation of ~21.5%. Precipitation strengthening is primarily responsible for the aged HEA. Digital image correlation (DIC) images corresponding to the tensile testing have shown that the homogenized and aged HEA exhibit uniform deformation, whereas the stress concentration could be observed in the as-cast HEA. Additionally, electron channeling contrast imaging (ECCI) analyses reveal that multiple deformation mechanisms including coherent L12 precipitates, the stacking fault (SF) network, the high-density dislocation walls (HDDWs) and dislocation cells, jointly acted as the dislocation obstacles for the aged HEA, contributing to the excellent strain-hardening ability for the outstanding strength-ductility synergy.

Heterogeneous Precipitation Strengthened Non-Equiatomic NiCoFeAlTi Medium Entropy Alloy with Excellent Mechanical Properties

Microstructural and Mechanical Properties of Non-Equimolar NiCoFeAlTi Medium Entropy Alloy Strengthening by L12 Nanoparticles

Enhancing Strength-Ductility Synergy of CoCrNi-Based Medium-Entropy Alloy Through Coherent L1 2 Nanoprecipitates and Grain Boundary Precipitates

Nano-precipitates Strengthened Non-Equiatomic Medium-Entropy Alloy with Outstanding Tensile Properties

Ultrastrong and Ductile Metastable Fe-rich Medium-Entropy Alloy with High-Density Nanolamellar L12 Precipitates

Heterogeneous Precipitates Facilitate Excellent Mechanical Properties in Non-Equiatomic Medium-Entropy Alloy

Mechanical properties and microstructural evolution of a novel (FeCoNi)86.93Al6.17Ti6.9 medium entropy alloy fabricated via powder metallurgy technique

An As-Cast High-Entropy Alloy With Remarkable Mechanical Properties Strengthened By Nanometer Precipitates

Precipitation-hardened High Entropy Alloys with Excellent Tensile Properties

Heterogeneous Structure Induced Excellent Mechanical and Wear Properties in Co-free FeCrAlNi Medium-Entropy Alloys

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

Co-free non-equilibrium medium-entropy alloy with outstanding tensile properties

A Novel (cofeni)82ti5al5v8 Medium Entropy Alloy Showing an Ultra Yield Strength and a Good Ductility by L12 Nanoparticles Strengthening and Dislocation Strengthening

An additively manufactured precipitation hardening medium entropy alloy with excellent strength-ductility synergy over a wide temperature range

Novel B2-strengthening Ni–Co–Cr–Al Medium-Entropy Alloys with Prominent Mechanical Performance

A Novel High-Entropy Alloy with Multi-Scale Precipitates and Excellent Mechanical Properties Fabricated by Spark Plasma Sintering

Strengthening Mechanisms and Deformation Behavior of a Non-Equiatomic Ni35co27.5cr27.5al5ti5 High-Entropy Alloy with Spherical L12 Nanoprecipitates

A Strong and Ductile NiCoCr-based Medium-Entropy Alloy Strengthened by Coherent Nanoparticles with Superb Thermal-Stability

Excellent Strength-Ductility Synergy Assisted by Dislocation Dipole-Induced Plasticity in Co-free Precipitate-Strengthened Medium-Entropy Alloy

A Precipitation-Hardened High-Entropy Alloy with Outstanding Tensile Properties

Microstructure and mechanical property of novel L12 nanoparticles-strengthened CoFeNi-based medium entropy alloys