Abstract:We present a Kalman filter-based approach for estimating external forces and torques relying on a dynamic model of a serial-chain robotic manipulator where only motor signals (currents, joint angles, and joint speeds) are measurable. The method does not require any additional sensing compared to standard robot control systems. The approach exploits redundancy in 7DOF arms, but also applies to traditional 6DOF manipulators. Automatic filter calibration routines are presented minimizing the number of parameters that must be tuned in order to successfully apply the proposed scheme and to optimize estimation quality. The approach is verified by measurement data gathered from an ABB YuMi, a dual-arm collaborative robot with 7DOF each arm. Furthermore, measurement results are presented employing force and torque estimates in a compliance control scheme, verifying that the estimation quality achieved is improved compared to existing approaches and is sufficient to employ the estimates in force-controlled applications.Note to Practitioners—More and more robotic applications involve contact with at least partially unknown environments. As a consequence, they require control approaches that go beyond the traditional position control. In particular, information about contact forces and torques has to be taken into account. However, integrating additional sensing equipment to obtain the required force/torque information is often technically challenging and expensive. Cartesian contact force and torque estimation allows obtaining force/torque information solely from available sensors. The estimation technique can be regarded as a virtual sensor, and hence this brief deals with a key technology enabling force controlled robotic applications such as assembly, grinding, and deburring without the need for expensive additional sensing.

External Forces/Torques Perception of Robot Endeffector Tip Based on a 6-Axis Force Sensor

Calibration of 6-DOF Parallel Mechanism Using Joint Force Sensors

End-effector Contact Force Estimation for the Industrial Robot in Automated Fiber Placement Processes with Dynamic End-Load Variations

Six-axis Force/Torque Sensor Based on Stewart Platform

Design and Optimization of Elastic Structure of Miniature Six-Dimensional Force/Torque Sensor

Terminal Force Soft Sensing of Hydraulic Manipulator Based on the Parameter Identification

Fine Robotic Manipulation without Force/Torque Sensor

Gravity compensation and output data decoupling of a novel six-dimensional force sensor

A Six-axis Force/Torque Sensor Method for the Inertial Parameter Identification of a Parallel Manipulator

Structural Design and Static Calibration of Six-axis Force/Torque Sensor

Research on Gravity Compensation Method of Six-Axis Force/Torque Sensor for Orthopedic Surgical Robot

A Novel Flexible Centralized Force Sensor Based on Tri‐Axis Force Refactoring Method for Arbitrary Force Components Measurement

The Device for Calibration Based on the Six-freedom of Generalized Force

Design and static calibration of a six-dimensional force/torque sensor for minimally invasive surgery

Automated Calibration Robotic System Capable of Producing Versatile Force Combinations for Multiaxis Force/Torque Sensors

Capability Verification and Error Source Investigation of External Force Sensing Methods of Continuum Robot

On the Calibration of Force/Torque Sensors in Robotics

Six-Axis Force Torque Sensor Model-Based In Situ Calibration Method and Its Impact in Floating-Based Robot Dynamic Performance

Motor-Current-Based Estimation of Cartesian Contact Forces and Torques for Robotic Manipulators and Its Application to Force Control

An Integrated Compensation Method for the Force Disturbance of a Six-Axis Force Sensor in Complex Manufacturing Scenarios

Force/Torque Sensing for Soft Grippers using an External Camera