Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The positioning accuracy of medical bone drilling has a great impact on the success rate of orthopedic surgery. Due to the need for high accuracy of medical bone drilling, with use of any 6-DoF-type robotic arm to assist in drilling, a novel six-degree-of-freedom compensation positioning algorithm of robotic arm-assisted medical bone drilling is proposed, in which only position but also orientation errors of robotic end are considered, increasing positioning capability of drilling instrument end effector with position and orientation correction for medical drilling motion accurate controlling. For the different position and orientation characteristics of the robot arm controlling and measurement point/zone, position and orientation transformation from measurement to controlling point/zone is established through position and angle calibration experiments, realizing position and orientation error measured by optical tracking system from measurement point/zone to controlling point/zone. Based on 6-DoF parameter and principle of robotic arm, a positioning compensation model based on the 6-DoF position and orientation errors of robotic arm end is proposed, and iteration cycle is used for higher accuracy, realizing double correction of position and orientation of robotic arm end. The accuracy verification experiments measured by the optical tracking system shows that the average position error before and after the 6-DoF compensation positioning algorithm reduces from 1.42 mm (before compensation with DH-based inverse kinematic model) to 0.20 mm (after compensation model) and the average angle error from 0.470° to 0.046°. A bovine spine drilling experiment is carried out based on the 6-DoF compensation algorithm, and the average position error of the hole in the specific direction measured by the contour projector is 0.221 mm, achieving high positioning accuracy of bone drilling, demonstrating reliability and practical application value of medical bone drilling with the compensation of positioning algorithm.

Research on Gravity Compensation Method of Six-Axis Force/Torque Sensor for Orthopedic Surgical Robot

Design and static calibration of a six-dimensional force/torque sensor for minimally invasive surgery

Learning-Based Force Control of a Surgical Robot for Tool-Soft Tissue Interaction

Hybrid Data-Driven Optimization Design of a Layered Six-Dimensional FBG Force/Moment Sensor With Gravity Self-Compensation for Orthopedic Surgery Robot

Gravity compensation algorithm for hybrid master manipulator

Gravity compensation and output data decoupling of a novel six-dimensional force sensor

An Integrated Compensation Method for the Force Disturbance of a Six-Axis Force Sensor in Complex Manufacturing Scenarios

A traction-force control method for manipulator with tool's gravity compensation

A 6-Axis Sensor for Minimally Invasive Robotic Surgery

In Situ Calibration of Six-Axis Force–Torque Sensors for Industrial Robots with Tilting Base

FBG-Based Sensorized Surgical Instrument for Force Measurement in Minimally Invasive Robotic Surgery

Partial gravity compensation of a surgical robot

Research Gravity Compensation for Master Manipulator with Time Delay

Design and Research of the Grasping Force Feedback Mechanism of Flexible Surgical Robots

Six degrees of freedom positioning compensation method of robotic arm-assisted medical bone drilling

An active force positioning control strategy for the minimally invasive surgical manipulator

Design and application of multi-dimensional force/torque sensors in surgical robots: A review

Model-based Grasp Force Estimation for Minimally Invasive Surgery

Six-dimensional constraints and force feedback for robot-assisted teleoperated fracture reduction

Development and Calibration of Large Deformation-Compliant Six-Axis Force Sensor

Development of A Six-Dimensional Sensor for Minimally Invasive Robotic Surgery