Abstract:Considering the problems of high tillage resistance, high energy consumption, and failure to break the plow pan in subsoiling caused by the high viscosity of tea garden soil, a new design method of a subsoiler underlying the subsoiling mechanism based on structural bionics and the discrete element method is proposed. Taking the largest toe of mole cricket's forefoot as the bionic object, the biological information of the contour of mole cricket's toe was extracted using the methods of image processing and reverse engineering, and the edges of its outer and inner contours were obtained. Combined with the structure of an existing subsoiler, initial point cloud data of a bionic subsoiling shovel were mapped by the methods of proportional amplification and rotation. Taking the minimum sum of outer and inner contour fitting errors as the optimal objective function and selecting high-order polynomial as the fitting function, the optimization model of the outer and inner contour point cloud fitting function was established. The optimal fitting function of the outer and inner contour point cloud was obtained, and the bionic subsoiler model was established based on these two optimal functions. In the study of the discrete element, four soil particle models were proposed based on the actual shape of the cohesive soil of a tea garden. Based on the principle of discrete elements and the agronomic requirements, a modeling method of the plow pan soil was proposed. First, the adjacent soil particles at the bottom were connected by bonding, and the soil with large porosity was squeezed by the preset force to form the plow pan soil. Then, six tillage layers were added above the plow to form a soil structure model of the tea garden. The bionic subsoiler was assembled into a four-bar subsoiling mechanism. The process of the subsoiling mechanism acting on the soil was analyzed by the co-simulation of ADAMS-EDEM and compared with the common subsoiler. The results showed that the bionic subsoiler, compared with the common subsoiler, reduced the tillage force in the horizontal direction by 16.34% and in the vertical direction by 24.53%, reduced energy consumption by 9.64%, increased the damage to the plow pan by 5.10%, and caused greater disturbance to the internal soil. The influence of different driving speeds on the tillage performance was studied, which provides a theoretical reference for the better selection of the working speed for subsoiling.

Increasing the Width of Disturbance of Plough Pan with Bionic Inspired Subsoilers

Optimization design and performance study of a subsoiler underlying the tea garden subsoiling mechanism based on bionics and EDEM

Tillage force and disturbance characteristics of different geometric-shaped subsoilers via DEM

A Comprehensive Study on the Mechanical Properties of Bulldozing Plate Soil Engaging Surface Based on the Entropy-Weighted Grey Relational Analysis Method.

Mesoscopic analysis of drag reduction performance of bionic furrow opener based on the discrete element method

Study on plowing performance of EDEM low-resistance animal bionic device based on red soil

Bionic Optimization Design and Discrete Element Experimental Design of Carrot Combine Harvester Ripping Shovel

Resistance and Consumption Reduction Mechanism of Bionic Vibration and Verification of Field Subsoiling Experiment

Bionic optimization research of soil cultivating component design

Study on the reduction of soil adhesion and tillage force of bionic cutter teeth in secondary soil crushing

Study on Plant Crushing and Soil Throwing Performance of Bionic Rotary Blades in Cyperus esculentus Harvesting

Effects of bionic non-smooth surface on reducing soil resistance to disc ploughing

Design and Experimental Study of a Bi-Directional Rotating Stubble-Cutting No-Tillage Planter

Modeling the interaction of soil and a vibrating subsoiler using the discrete element method

Modeling of soil–claw interaction using the discrete element method (DEM)

DESIGN AND DRAG REDUCTION PERFORMANCE ANALYSIS OF A POTATO HARVEST SHOVEL BASED ON THE SURFACE TEXTURE CHARACTERISTICS OF PANGOLIN SCALE

Discrete element modelling of tillage forces and soil movement of a one-third scale mouldboard plough

Experimental investigation of bionic rough curved soil cutting blade surface to reduce soil adhesion and friction

Study on comprehensive mechanical properties of bulldozing plate soil engaging surface based on the entropy-weighted grey relational analysis method

Analysis of the movement behaviour of soil between subsoilers based on the discrete element method

Study on the Interaction between Soil and the Five-Claw Combination of a Mole Using the Discrete Element Method