Abstract:Considering the problems of high tillage resistance, high energy consumption, and failure to break the plow pan in subsoiling caused by the high viscosity of tea garden soil, a new design method of a subsoiler underlying the subsoiling mechanism based on structural bionics and the discrete element method is proposed. Taking the largest toe of mole cricket's forefoot as the bionic object, the biological information of the contour of mole cricket's toe was extracted using the methods of image processing and reverse engineering, and the edges of its outer and inner contours were obtained. Combined with the structure of an existing subsoiler, initial point cloud data of a bionic subsoiling shovel were mapped by the methods of proportional amplification and rotation. Taking the minimum sum of outer and inner contour fitting errors as the optimal objective function and selecting high-order polynomial as the fitting function, the optimization model of the outer and inner contour point cloud fitting function was established. The optimal fitting function of the outer and inner contour point cloud was obtained, and the bionic subsoiler model was established based on these two optimal functions. In the study of the discrete element, four soil particle models were proposed based on the actual shape of the cohesive soil of a tea garden. Based on the principle of discrete elements and the agronomic requirements, a modeling method of the plow pan soil was proposed. First, the adjacent soil particles at the bottom were connected by bonding, and the soil with large porosity was squeezed by the preset force to form the plow pan soil. Then, six tillage layers were added above the plow to form a soil structure model of the tea garden. The bionic subsoiler was assembled into a four-bar subsoiling mechanism. The process of the subsoiling mechanism acting on the soil was analyzed by the co-simulation of ADAMS-EDEM and compared with the common subsoiler. The results showed that the bionic subsoiler, compared with the common subsoiler, reduced the tillage force in the horizontal direction by 16.34% and in the vertical direction by 24.53%, reduced energy consumption by 9.64%, increased the damage to the plow pan by 5.10%, and caused greater disturbance to the internal soil. The influence of different driving speeds on the tillage performance was studied, which provides a theoretical reference for the better selection of the working speed for subsoiling.

DESIGN AND DRAG REDUCTION PERFORMANCE ANALYSIS OF A POTATO HARVEST SHOVEL BASED ON THE SURFACE TEXTURE CHARACTERISTICS OF PANGOLIN SCALE

Bionic Optimization Design and Discrete Element Experimental Design of Carrot Combine Harvester Ripping Shovel

A Comprehensive Study on the Mechanical Properties of Bulldozing Plate Soil Engaging Surface Based on the Entropy-Weighted Grey Relational Analysis Method.

Optimized Design and Experiment of a Self-Covering Furrow Opener for an Automatic Sweet Potato Seedling Transplanting Machine

Drag reduction and wear resistance mechanisms of a bionic shovel by discrete element method simulation

Design and comparative analysis of self-propelling drill bit applied to deep-sea stratum drilling robot

Drag reduction design and experiments for the chisel-shaped shovel tip

Optimization design and performance study of a subsoiler underlying the tea garden subsoiling mechanism based on bionics and EDEM

RESEARCH AND SIMULATION ANALYSIS OF PEANUT COMBINED HARVESTER EXCAVATING DEVICE

Study on comprehensive mechanical properties of bulldozing plate soil engaging surface based on the entropy-weighted grey relational analysis method

Bionic optimization research of soil cultivating component design

Reducing adhesion of soil against loading shovel using bionic electro-osmosis method

Study on plowing performance of EDEM low-resistance animal bionic device based on red soil

Design and Experiment Study of the Liquorice Digger

Mesoscopic analysis of drag reduction performance of bionic furrow opener based on the discrete element method

Optimization of Potato Soil Transportation Separation Mechanism Based on Discrete Element Method and TRIZ Theory

The Optimized Design of Soil-Touching Parts of a Greenhouse Humanoid Weeding Shovel Based on Strain Sensing and DEM-ADAMS Coupling Simulation

Experimental investigation of bionic rough curved soil cutting blade surface to reduce soil adhesion and friction

Optimization Design and Experiment of High-Speed Drag-Reducing Trencher Based on Conservation Tillage

Resistance and Consumption Reduction Mechanism of Bionic Vibration and Verification of Field Subsoiling Experiment

Study on the reduction of soil adhesion and tillage force of bionic cutter teeth in secondary soil crushing