Abstract:Ethylene is one of the largest building blocks in the petrochemical industry, mainly produced by steam cracking of ethane derived from naphtha or shale gas at high temperatures (>800 °C). Despite its technical maturity and economic competitiveness, the thermal steam cracking of ethane is highly energy-intensive. Herein, an electrochemically engineered direct conversion process of ethane to produce hydrogen and ethylene using a planar protonic ceramic membrane reactor with a bi-functional three-dimensional catalytic electrode is reported, with a single-pass ethane conversion of 40% and ethylene yield of 26.7% at 550 °C. Compared with the industrial ethane steam cracking, this method saves process energy input by 45.1% and improves process energy efficiency by 50.6%, based on comprehensive process simulation using Aspen Plus software. Further, steam electrolysis treatment under the solid oxide electrolysis cell mode can regenerate the system's catalytic performance and significantly alleviate catalytic degradation by 74%, demonstrating high techno-economic viability.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c03351.Fabrication procedures of electrochemical cell with 3D anode; XRD patterns and EDS mapping of PBFM material under different atmospheres; schematic of the in-house built dual-zone reactor; detailed process flow diagram of an EEDC process for Aspen Plus simulation; selectivity of various hydrocarbon products in the EEDC process at different temperatures above 600 °C under OCV conditions; C2H6 conversion and C2H4 yield at different applied currents, operating temperatures, and C2H6 feedstock concentration; electrochemical performance under EEDC and SOEC modes; results of Faraday efficiency measurement; GC raw data showing the formation of higher (C3+) hydrocarbon products in the EEDC process; TGA results and calculated coke content under different applied currents and after regeneration; C2H4 yield during each operation cycle with intermittent regeneration; cell resistance and SEM images of the integrated anode before and after the test; STEM image of PtGa/ZSM-5 catalyst before and after EEDC process; XPS result of the PtGa/ZSM-5 catalyst before and after reaction; assumptions for the Aspen Plus simulation of the EEDC process; reactions and corresponding conversions inside the EEDC reactor at 40 mA·cm–2 assumed for Aspen Plus simulation; process result summary of ethylene production from steam-ethane cracking and EEDC at an applied current density of 40 mA cm–2; specific energy input and output for the EEDC process; surface chemical composition of the PtGa/ZSM-5 catalyst before and after reaction (PDF)This article has not yet been cited by other publications.

Freestanding 3D Ordered Hierarchical Porous Carbon Aerogel Cathodes for Efficient Electrocatalytic Dechlorination of 1,2-Dichloroethane to Ethylene

Efficiently Electroreducing CO2 to Ethylene on Heterostructured CeO2/CuO

Sea-Urchin-Like Carbon Nanospheres for Electrocatalytic Dechlorination of 1,2-Dichloroethane

Efficient electrocatalytic valorization of chlorinated organic water pollutant to ethylene

Pd loaded and covalent-organic framework involved chitosan aerogels and their application for continuous flow-through aqueous CB decontamination

Active Sites in Single-Atom Fe–N x –C Nanosheets for Selective Electrochemical Dechlorination of 1,2-Dichloroethane to Ethylene

Manganese-Based Spinel Core–Shell Nanostructures for Efficient Electrocatalysis of 1,2-Dichloroethane

Nature of Intrinsic Defects in Carbon Materials for Electrochemical Dechlorination of 1,2-Dichloroethane to Ethylene

A scalable molecular-templating strategy toward well-defined microporous carbon aerogels for efficient water treatment and electrocatalysis

CO2-Promoted Electrocatalytic Reduction of Chlorinated Hydrocarbons

Chlorine-mediated Electrodeposition of Hierarchical and Hydrophobic Copper Electrocatalysts for Efficient CO2 Electroreduction to Ethylene.

High‐rate and Selective CO2 Electrolysis to Ethylene via Metal‐Organic Framework‐augmented CO2 Availability

An Efficient Tri‐Conductive Electrode for Ethane Direct Electrochemical Dehydrogenation on Proton Ceramic Electrolysis Cells

Electrochemically Engineered, Highly Energy-Efficient Conversion of Ethane to Ethylene and Hydrogen below 550 °C in a Protonic Ceramic Electrochemical Cell

Carbonized Yolk-shell Metal-Organic Frameworks for Electrochemical Conversion of CO2 into Ethylene

High-Rate and Efficient Ethylene Electrosynthesis Using a Catalyst/Promoter/Transport Layer

Novel Sr1.95Fe1.4Co0.1Mo0.5O6-δ anode heterostructure for efficient electrochemical oxidative dehydrogenation of ethane to ethylene by solid oxide electrolysis cells

Carbon-based materials for electrochemical dechlorination

Noble-metal-free 3D hierarchical Ni-WC heterostructure with enhanced interfacial charge transfer for efficient electrocatalytic hydrodechlorination

Scalable Cathodic H2O2 Electrosynthesis using Cobalt-Coordinated Nanocellulose Electrocatalyst

Efficient Ethylene Electrosynthesis Through C–O Cleavage Promoted by Water Dissociation