Abstract:Light olefins are mainly made from petrochemical industry. These short-chain hydrocarbons including ethylene and propylene are traditionally produced by steam cracking of naphtha or as byproducts of oil refining processes. Fischer−Tropsch synthesis obtains long-chain hydrocarbons from syngas (a mixture of H2 and CO). A promising process to produce lower olefins from synthesis gas is so-called FTO process. A variety of catalysts have been explored for FTO reaction. Unsupported iron oxide catalysts have been investigated, and in some cases they have exhibited high selectivity towards lower olefins when the iron was modified by the addition of promoters. However, the bulk catalysts are mechanically unstable when the reaction is performed at high temperature, which would swiches product selectivity to higher hydrocarbons. Under these conditions, the undesirable boundouard reaction 2CO(g)→C(s) + CO2(g), leads to the deposition of carbon. The poor mechanical stability of the bulk catalysts may lead to plugging of the catalyst bed in fixed-bed operation or to fouling of the separation equipment in a fluidized bed process. To overcome the low activity and stability problems, the use of supported iron catalyzts have been explored. The FTO reaction is a structure sensitive reaction. The catalytic performance is strongly related to the particle size of the metal or active phase. The addition of support changed the morphology of the catalyst and affects the particles size and dispersion. Iron forms mixed oxides when supported on alumina or silica which are difficult to reduce, and the formation of the active iron carbide phase is hindered. The MgO supported catalyst shown a more dispersion of the particles and also has shown lower particles adhesion, consequently shown a better catalytic performance. In the case of CNF supported catalysts, iron loading is directly related to particle size, thus higher iron contents result in larger iron-containing particles. The iron nanoparticles supported on CNF have narrow size distributions and they are homogeneously distributed on the support . In order to optimize the support of FTO catalysts, MgO modified Al2O3 supports have been studied in this research.

Unravelling the Metal–support Interactions in Χ-Fe5c2/mgo Catalysts for Olefin Synthesis Directly from Syngas

Syngas to Olefins with Low CO2 Formation by Tuning the Structure of FeCx-MgO-Al2O3 Catalysts

Metal-Metal Oxide Catalytic Interface Formation and Structural Evolution: A Discovery of Strong Metal-Support Bonding, Ordered Intermetallics, and Single Atoms

Topotactic Transformation of Metal–Organic Frameworks to Iron-based Catalysts for the Direct Hydrogenation of CO2 to Olefins

Tuning the Surface Carbonaceous Species in Syngas-to-Olefin Reaction by Metal-Support Interaction: A Fe-Mn-Al Ternary System Study

Selective Synthesis of the Core–shell Structured Catalyst Χ-Fe5c2 Surrounded by Nanosized Fe3O4 for the Conversion of Syngas to Liquid Fuels

Unraveling the Role of Zinc on Bimetallic Fe5C2–ZnO Catalysts for Highly Selective Carbon Dioxide Hydrogenation to High Carbon Α-Olefins

Revisiting the Syngas Conversion to Olefins over Fe-Mn Bimetallic Catalysts: Insights from the Proximity Effects

Syngas-derived Olefins over Iron-Based Catalysts: Effects of Basic Properties of MgO Nanocrystals

Selective synthesis of the core–shell structured catalyst χ-Fe 5 C 2 surrounded by nanosized Fe 3 O 4 for the conversion of syngas to liquid fuels

Long-chain Α-Olefins Production over Co-MnOx Catalyst with Optimized Interface

Uncovering the Electronic Effects of Zinc on the Structure of Fe5C2-ZnO Catalysts for CO2 Hydrogenation to Linear Α-Olefins

MnOx Promotional Effects on Olefins Synthesis Directly from Syngas over Bimetallic Fe‐MnOx/SiO2 Catalysts

Highly Tunable Selectivity for Syngas‐Derived Alkenes over Zinc and Sodium‐Modulated Fe5C2 Catalyst

Selective fabrication of χ-Fe5C2 by interfering surface reactions as a highly efficient and stable Fischer-Tropsch synthesis catalyst

Harnessing the Synergistic Interplay of Fischer‐Tropsch Synthesis (Fe‐Co) Bimetallic Oxides in Na‐FeMnCo/HZSM‐5 Composite Catalyst for Syngas Conversion to Aromatic Hydrocarbons

Metal–support interactions in Fe–Cu–K admixed with SAPO-34 catalysts for highly selective transformation of CO 2 and H 2 into lower olefins

Selective synthesis of olefins via CO 2 hydrogenation over transition-metal-doped iron-based catalysts

Revealing the Interaction Between Cu and MgO in Cu/MgO Catalysts for CO Hydrogenation to CH3OH

MgO modification of Fe-based Al2O3 catalysts for the coversion of syngas to light olefins

Mechanistic Insight into Hydrocarbon Synthesis via CO2 Hydrogenation on χ-Fe5C2 Catalysts