Abstract:A wide variety of complicated material removal methods and cutting tools have been employed in the field of mold forming. An insight should be gained into the action law of basic cutting parameters and tool structure on cutting force, which lays a solid basis for the design of machine tools, tools and fixtures in mold high-performance manufacturing. In this study, an analytical model of milling force for milling H13 steel is built by combining the multi-physical field calculation method of cutting deformation zone and the equivalent cutting edge theory. A multi physical field calculation method for the first deformation zone is proposed in combination with the common correlation between the equal and unequal models of the main shear zone. The model correctly indicates the distribution characteristics of temperature and stress in the shear zone, consistent with the distribution of the two-dimensional (2D) finite element model. Given the changes of cutting parameters and tool geometric angles, the chip flow angle prediction model of different tool-chip contact states is built. The oblique cutting force prediction model is implemented through coordinate conversion based on the equivalent cutting edge. The interaction mechanism of tool geometry and tool angle on cutting force components is revealed, respectively. A mechanical model of the three-dimensional (3D) face milling process of H13 steel is built to more effectively verify the feasibility of the machining mechanical model, and the effect of milling parameters on the milling process force is expressed. The correctness of the model was verified by experimentally measuring the milling force. The built analytical cutting force model can lay a theoretical basis for the recommendation of reasonable tool structure and milling parameters for H13 steel.

A New Method for Prediction of Cutting Force Considering the Influence of Machine Tool System and Tool Wear

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Three-dimensional turning force prediction based on hybrid finite element and predictive machining theory considering edge radius and nose radius

A New Method for Cutting Force Prediction in Peripheral Milling of Complex Curved Surface

A new cutting force prediction method in ball-end milling based on material properties for difficult-to-machine materials

Inverse model of the cutting forces prediction in orthogonal cutting

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

A New Procedure for the Prediction of the Cutting Forces in Peripheral Milling

A prediction method of cutting force coefficients with helix angle of flat-end cutter and its application in a virtual three-axis milling simulation system

Generic Cutting Force Modeling with Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Stochastic Cutting Force Modeling and Prediction in Machining

Generic Cutting Force Modeling Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Online monitoring model of micro-milling force incorporating tool wear prediction process

Full life-cycle cutting force prediction in ball helical milling based on oblique cutting analysis

Force prediction in ultrasonic vibration-assisted milling

Experimental analysis and modeling of cutting power model

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

Multi-physics analytical modeling of the primary shear zone and milling force prediction

An accurate prediction method of cutting forces in 5-axis flank milling of sculptured surface

New Dynamic Cutting Force Modelling of End Milling and Its Application

Intelligent monitoring of milling tool wear based on milling force coefficients by prediction of instantaneous milling forces