Abstract:By studying the various metal ions released from the grinding process, and conducting the flotation test of monazite and symbiotic ore, using zeta potential measurements and FTIR infrared spectrum analysis methods, the influence of metal ions on the surface of monazite and the mechanism of action are obtained. The results showed that the main metal ions in the flotation environment of monazite are Ca 2+ , Ba 2+ , and Fe 3+ . When the pulp pH value was 8, Ca 2+ , Fe 3+ , and Ba 2+ concentration was 3×10 -4 mol/dm 3 , 3×10 -5 mol/dm 3 , and was 2×10 -4 mol/dm 3 respectively, and OHA collector dosage was 5×10 -4 mol/dm 3 , while the flotation recoveries of monazite, calcite. And fluorite was above 95 %, 40.43 %, and below 45.32 %, and the recovery rate of barite and bastnaesite in the presence of Ca 2+ and Fe 3+ is below 54.32 % and 38.68 %, respectively and the effective separation of monazite and symbiotic ore was obtained. The zeta potential measurements showed that when only metal ions are added to monazite, monazite (IEP) shifts to the right, and the negative charge on the surface of monazite decreases, which may be due to the positive charge of metal ions adsorbed on the surface of monazite, increasing the positive charge on the surface of monazite. When Ca 2+ , Ba 2+ , Fe 3+ , and OHA were added to the monazite pulp, the IEP of monazite moved to the left, and the negative charge of monazite shifted to the positive direction as a whole, indicating that Ca 2+ , Ba 2+ , and Fe 3+ were adsorbed on the surface of monazite and increase the positive charge on the surface of monazite. When the pH value was 7 ~ 10, the surface of monazite was the same as that before and after the action of the agent, and both were negatively charged. At this time, OHA can still adsorb on the calcite, that was, the chemical affinity overcomes the same electric repulsion and adsorbs, so that the potential of the monazite after the action is reduced, which is chemical adsorption. The FTIR showed that when the metal ions Ca 2+ , Ba 2+ , and Fe 3+ are added to activate the surface of monazite, the peak area of the organic functional group-CH2−CH3 at 3000-2800 cm−1 was enhanced, and a new peak appears at 1382 cm −1 . The reason is that the N-O-H functional group of OHA collector was adsorbed on the surface of monazite, and a red shift (44 cm −1 ) occurs, and a new peak appears at 1454 cm −1 . The reason is that the C-N functional group of OHA collector is adsorbed on the surface of monazite. The lone electron pair of the nitrogen atom of the amide group in the OHA forms chelates with Ca 2+ , Ba 2+ , and Fe 3+ atoms, which further increases the adsorption amount of OHA. This showed that the adsorption of monazite surface by metal ions provides active sites for the adsorption of OHA collectors. These phenomena indicate that the adsorption capacity of OHA on the surface of monazite activated by Ca 2+ , Ba 2+ , and Fe 3+ is enhanced and a stable five-membered ring metal chelate is formed. Combined with flotation results and zeta potential data, infrared spectroscopy analysis, the adsorption capacity of Ca 2+ , Ba 2+ , and Fe 3+ activated monazite surface: Fe 3+ >Ca 2+ >Ba 2+ .

Adsorption Mechanism and Flotation Behavior of Ammonium Salt of N-Nitroso-N-phenylhydroxyamine on Malachite Mineral

Structural modification of hydroxamic acid collectors to enhance the flotation performance of malachite and associated mechanism

Surface activation of malachite by ammonium acetate for improved flotation separation of malachite from calcite

Surface modification of malachite with tetraamminecopper (II) and its effect on sulfidation flotation

Selective modification of malachite with ammonium carbamate to promote flotation separation from calcite

Effect of dissolved components of malachite and calcite on surface properties and flotation behavior

The effect and mechanism of cinnamic hydroxamic acid as a collector in flotation separation of malachite and calcite

Enhanced Kaolinite Flotation Using Amine Coated Nanobubbles

Understanding the Adsorption Mechanism of BTPA, DEPA, and DPPA in the Separation of Malachite from Calcite and Quartz: DFT and Experimental Studies

Flotation performance and adsorption mechanism of 5-hydroxyoctan-4-one oxime to malachite

The interaction mechanism of Fe3+ and NH4+ on chalcopyrite surface and its response to flotation separation of chalcopyrite from arsenopyrite

Mechanistic insights into stepwise activation of malachite for enhancing surface reactivity and flotation performance

New Insights into the Role of Thiol Collectors in Malachite Flotation

Ammonia-induced corrosion and modification of chrysocolla surface for enhanced adsorption of sulfide species

Synthesis of 1-(2-Hydroxyphenyl) Dec-2-en-1-One Oxime and Its Flotation and Adsorption Behavior for Malachite

Improved activation of malachite sulfurization flotation by thiourea's (CS(NH 2 ) 2 ): Performance and mechanism study

Study on the mechanism of action of various metal ions on the surface of monazite

Selective collection performance of an efficient quartz collector and its response to flotation separation of malachite from quartz

Magnetic Nitrogen-Doped Carbon Composites Decorated with Carbon Nanotubes for Adsorption of Malachite Green

Flotation separation mechanism of malachite from calcite using the pentyl xanthate as the collector

Interaction mechanism of 2-hydroxy-3-naphthyl hydroxamic acid and 1-hydroxy-2-naphthyl hydroxamic acid in the flotation separation of bastnaesite/fluorite: Experiments and first-principles calculations