Abstract:Bituminous coal char particles will differ in morphology, porosity, reactivity, and behavior within the zone II regime (where most practical system operates) due to the influence of maceral, rank, and time-temperaturehistories. Effective boiler design requires simulations that appropriately capture char behavior. Most simulations, however, assume solid spherical particles that have homogeneous physical and chemical properties. Unfortunately, coal and time-temperature-history variations make it impossible to make a direct comparison of morphologies alone using traditional experimental approaches. Thus, here the influences of coal char morphologies on its reaction behavior and physical structure were explored via small-scale atomistic simulations. Three (ashfree) chars of solid, thick-, and thin-walled morphologies were examined. The atomistic representations had similar to 143000 carbon atoms, comprised of similar polycyclic aromatic hydrocarbons (PAH) sizes and stacking distributions. While these structures are far below the actual particle size, the approach permits a direct comparison with a level of control not possible via physical experimentation. The densities of the thick- and thin-walled char models were similar to literature observations (apparent and helium densities). The specific surface area for the solid, thick-, and thin-walled char models were 110, 368, and 509 m(2)/g, with the latter two being closer to experimental data. A simplified combustion simulation (diffusion and oxygen proximity calculations) demonstrated that the char morphology had a significant impact upon their relative reactivities. The thin-walled structure had the highest overall reactivity due to greater reactive surface access, while the solid and thick-walled structure was respectively 27 and 23% lower. The reaction rate profiles with char conversion for these three structures are close to the experimental observations for pulverized bituminous coal chars, where the rate peak occurs at similar to 20% conversion. The changes in char size, density, and specific surface area (with char conversion) indicated the thick-walled structure was more similar to the literature data. These atomistic approaches have the potential to aid in exploring the reaction behavior of char particles with various morphologies and complicated structures. With scale-up additional behaviors such as particle fragmentation and ash behavior could be incorporated.

Numerical investigation of the influence of particle shape, pretreatment temperature, and coal blending on biochar combustion in a blast furnace

Non-isothermal Thermogravimetric Investigation on Mutual Effect Between Bituminite and Anthracite in Blends for Blast Furnace Injection

Numerical Simulation of the Synergistic Effect of Combustion for the Hydrochar /coal Blends in a Blast Furnace

Kinetic Study on Co-Combustion of Pulverized Anthracite and Bituminite for Blast Furnace Injection

Effect of pyrolysis temperature on blast furnace injection performance of biochar

Gas Emissions from Blends of Bituminous Coal and Biomass Chars under Different Pyrolysis Conditions

Co-injection of hydrogen and biochar (CoHB) in a simulated blast furnace: A univariate and multivariate study

Computational modeling of oxy-coal combustion with intrinsic heterogeneous char reaction models

An improved model for char combustion in blast furnace pulverized coal injection

Computational Fluid Dynamics Study of the Flow and Thermochemical Behaviors of a Carbon Composite Briquette in an Ironmaking Blast Furnace

CFD Study of Bio-Syngas and Coal Co-Injection in a Blast Furnace with Double Lance

Experimental and Modeling Investigation of Oxy-Coal Combustion Based on Langmuir-Hinshelwood Kinetics and Direct Calculation of Char Morphology

The Influence of Char Particle Morphology on Char Burnout Behavior by Atomistic Simulation

Three-dimensional Modelling of Coal Combustion in Blast Furnace

A DNS Study on Temporally Evolving Jet Flames of Pulverized Coal/biomass Co-Firing with Different Blending Ratios

Pyrolysis Characteristics of Coal, Biomass, and Coal–Biomass Blends under High Heating Rate Conditions: Effects of Particle Diameter, Fuel Type, and Mixing Conditions

Three-dimensional Modeling Study of the Oxy-Fuel Co-Firing of Coal and Biomass in a Bubbling Fluidized Bed

Transient 3D CFD study of pulverised coal combustion and coke combustion in a blast furnace: Effect of blast conditions

HMB-CFD study of oxygen-enriched pulverised coal combustion in an ironmaking blast furnace

Experimental and Modeling Study of Pyrolysis of Coal, Biomass and Blended Coal–biomass Particles

Experimental and Numerical Investigations on the Interactions of Volatile Flame and Char Combustion of a Coal Particle