Abstract:Under a low flow rate, gravity may become prominent for bubble behavior and heat transfer of flowing boiling because of the weakness of drag force from liquid, and its effect changes with the inclination angle of the mini-channel but without consensus. In this paper, based on a reasonable nucleus site density model and considering conjugate heat transfer, the coupled volume-of-fluid and level set method is adopted to study the subcooled flow boiling in an inclined three-dimensional rectangular mini-channel (0°–180°) with a characteristic size of 1.0 mm at a low flow rate of 88.8 kg m−2 s−1. The inclination angle is found to have a slight effect on the flow boiling, which is different from the conclusion drawn based on the traditional-macro channel. A bubbly flow appears when a heat flux of 300 kW/m2 is added. An unconventional impact force is proposed, which presses large bubbles to slip along the heating wall, with slight differences in the flow pattern under different inclination angles. When the inclination angle is close to 0°, the upstream small/medium bubbles leave the heating wall under gravitational effects, which is conducive to heat transfer. As the inclination angle approaches 90°, gravity pushes the large bubbles downstream to leave the channel, favoring the rewetting of the dry patches below. These two positive effects fail as the inclination angle approaches 180°, leading to slightly worse overall heat exchange efficiency. However, the maximum differences in the average and local wall superheating of the mini-channel are only 8.4% and 22.5%, respectively, across the range of inclination angles because the flow pattern remains similar under the effect of the impact force. In addition, the effect of inclination angle on flow boiling becomes weaker with the increase in heat flux because of happening of slug flow.

Experimental Study of Onset of Nucleate Boiling in Vertical Rectangular Channels with Different Flow Path Heights

Experimental Study on Onset of Nucleate Boiling in Wide-Ranged Parameters for Narrow Rectangular Channels

Studies on the onset of nucleate boiling in vertical rectangular flow channels

Experimental study on onset of nucleate boiling in narrow rectangular channel under static and heaving conditions

Study on Onset of Nucleate Boiling in Bilaterally Heated Narrow Annuli

Experiment Study of the Onset of Nucleate Boiling in Narrow Annular Channel

The Experimental Research on Subcooled Flow Boiling in Vertical Narrow Rectangular Channels with Relatively Wide-Ranged Parameters

Experimental Study on Onset of Nucleate Boiling(onb)in Different Wettability Micro-Channels

Local Heat Transfer in Subcooled Flow Boiling in a Vertical Mini-Gap Channel

Effects of Heat Flux, Mass Flux, Inlet Fluid Subcooling, and Channel Orientation on Subcooled Flow Boiling in a High-Aspect-Ratio Rectangular Microchannel

Experimental Study on Flow and Heat Transfer Characteristics at Onset of Nucleate Boiling in Micro Pin Fin Heat Sinks

Experimental Analysis On Thermal Characteristics Of Two-Phase Water In Narrow Rectangular Channels

Numerical Simulation of Single Bubble Growth in Vertical Rectangular Narrow Flow Channels

Study on the Onset of Nucleate Boiling in Narrow Annular Channel by Genetic Neural Network

Experimental Study on Local Subcooled Flow Boiling Heat Transfer in A Vertical Mini-Gap Channel

Natural convective boiling in vertical rectangular narrow channels

Experiment study of flow boiling heat transfer characteristics in horizontal rectangular channel

EXPERIMENTAL INVESTIGATION ON LIQUID NITROGEN BOILING HEAT TRANSFER IN NARROW CHANNELS WITH VARYING INCLINATION ANGLES

Numerical Investigation of Subcooled Flow Boiling in an Inclined Rectangular Mini-Channel at a Low Flow Rate

Numerical investigation of critical heat flux during subcooled flow boiling in a vertical rectangular Mini-channel

Experimental Study On Flow Heat Transfer In The Vertical Narrow Annuli