Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Strengthening of the Concrete Face Slabs of Dams Using Sprayable Strain-Hardening Fiber-Reinforced Cementitious Composites

Compressive Behavior of GFRP Tubes Filled with Self-Compacting Concrete

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Experimental Investigation on First Crack Strength and Crack Widthof Reinforced Concrete Beamsby Side-Bonding Cfrp Sheets

Construction of Concrete-Faced Rockfill Dams with Weak Rocks

The simulation of high compressive stress and extrusion phenomenon for concrete face slabs in CFRDs under strong seismic loads

Three-dimensional refined analysis of seismic cracking and anti-seismic measures performance of concrete face slab in CFRDs

Wet Swelling Effect on Crack Performance of Facing Concrete for Rockfill Dams

Study on the Technique of Soft-Rock Placement for CFRD

Strengthening of reinforced concrete structure using sprayable fiber-reinforced cementitious composites with high ductility

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Experimental investigation on the flexural performance and damage process of steel fiber reinforced recycled coarse aggregate concrete

Mechanical properties and engineering application of cellulose fiber-reinforced concrete

Mechanisms and simulation methods for extrusion damage of concrete faces of high concrete-faced rockfill dams

Influence on Stress and Deformation of Concrete Faced Rockfill Dam Using Extrusion-Sidewall

Experimental investigation of corrosion-damaged RC beams strengthened in flexure with FRP grid-reinforced ECC matrix composites

Bending Performance of RC Slabs Strengthened by CFRP Sheets Using Sprayed UHTCC As Bonding Layer: Experimental Study and Theoretical Analysis

Effect of strengthening by carbon fiber reinforced polymer sheets on the flexural behavior of reinforced self-compacting concrete beams under repeated loads

A novel constitutive model for the concrete face slab of a CFRD and the numerical simulation of its seismic behavior

Prediction and numerical simulation of the face‐slab extrusion damage of Dashixia concrete faced rock‐fill dam