Abstract:Dry reforming of methane is one of the few chemical reactions which can effectively convert carbon dioxide (CO2), a major green-house gas, into a valuable chemical precursor, syngas (a mixture of CO and H2), that can be converted into chemicals and fuels via different synthesis routes such as the Fischer Tropsch synthesis. The inherent limitations of dry reforming reaction, for instance, rapid catalyst deactivation by coke deposition and the very high energy requirements, has restricted its use as a commercial technology. This study was performed to evaluate the potential of overcoming the limitations of dry reforming by integrating it with other commercial methane reforming technologies such as steam reforming and partial oxidation reforming in the context of industrial operating conditions. A thermodynamic and kinetic analysis of the combined reforming has been conducted using the software suite MATLAB®. The aim of this complicated assessment is to identify optimized combination of the three reformers and also the corresponding operating conditions that would utilize significant amount of CO2 while ensuring CO2 fixation, minimum carbon formation and optimum energy requirements. The thermodynamic equilibrium product distribution calculations involved the Peng Robinson (PR), Redlich Kwong (RK) and Soave Redlich Kwong (SRK) equations of state (EOS) to identify the best EOS that accounts for the non-ideality associated with the high pressure operation. The study evaluated simultaneous effects of temperature (200°C–1200°C), pressure (1–20bar) and feed mole ratios (of methane, steam, carbon dioxide and oxygen) on the equilibrium product distribution. The addition of oxygen and steam to dry reforming helped in decreasing energy requirements while simultaneously increasing the syngas yield ratio (H2:CO ratio). The numerical evaluation revealed an optimized operating condition of ∼750°C at 1bar pressure at a feed mole ratio CH4:H2O:O2:CO2 of 1:0.4:0.3:1. For this optimization, the system boundaries were limited only to a reformer block without considering the upstream and dowstream processes. At this optimized condition, the carbon deposition was eliminated and the CO2 conversion was observed to be 47.84% with an energy requirement of 180.26kJ. The study is further extended to include kinetic analysis of combined dry and steam reforming of methane. The preliminary findings of kinetic evaluation indicated an excellent agreement between combined kinetic model with the thermodynamic equilibrium results.

Thermodynamic Analysis of Hydrocarbon Reforming

Thermodynamic calculations for reactive sorption enhanced reforming of C2/C3 light hydrocarbons

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

Exergy Analysis of Hydrogen Production by Steam Reforming of Hydrocarbons and Its Carbon Emission Evaluation

Kinetic Study of Reactive Sorption-Enhanced Reforming of Coke Oven Gas for Hydrogen Production

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Thermodynamic Analysis of Propane Aromatization

Exergy analysis and CO2 emission evaluation for steam methane reforming

Characterization of CH4-CO2-O2 Diffusion Flames Near Autothermal Reforming Condition

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

A combined thermo-kinetic analysis of various methane reforming technologies: Comparison with dry reforming

Thermodynamic analysis of fossil fuels reforming for fuel cell application

Hydrogen and CO Over-Equilibria in Catalytic Reactions of Methane Reforming

Sorption-enhanced reforming of raw COG and its adaptability to hydrogen metallurgy: Thermodynamic analysis

Effect Of Ng Composition On Reformed H-2 And Co

Mechanistic Kinetic Modelling Framework for the Conversion of Waste Crude Glycerol to Value-Added Hydrogen-Rich Gas

The chemistry of methane reforming with carbon dioxide and its current and potential applications

Steam, dry and autothermal methane reforming for hydrogen production: A thermodynamic equilibrium analysis

Equilibrium Composition of Dimethyl Ether Steam Reforming to Hydrogen

Steam Reforming of Acetic Acid for Hydrogen Production: Thermodynamic Calculations

Hydrogen Production Via Catalytic Reforming of the Bio-Oil Model Compounds: Acetic Acid, Phenol and Hydroxyacetone