Abstract:This paper shows a complete computing procedure for calculating the thermal conductivities of silica aerogel composite insulating materials by considering the heat conduction and thermal radiation simultaneously. A fractal-intersecting sphere model was proposed for the nano-porous silica aerogel in which the scale effect on gas conduction and solid-matrix conduction were both considered. While for micro-scale composite insulating materials, Rossland approximation and a mixing model were used to account for the multiphase material’s radiative thermal conductivity and conductive thermal conductivity respectively. The radiative properties of additives (opacifier particles and fibers), which are needed for calculating the radiative conductivity in Rossland equation, are determined by Mie theory. Based on the theoretical model, the conductivities of silica aerogel with opacifiers and fibers were calculated, and the contributing factors, such as the doping concentration, size (particle diameter or fiber diameter), different opacifiers (carbon(C), carbide (SiC), titanium dioxide (TiO2)), fiber orientation, and temperature on thermal conductivities were systematically investigated. The results show that the total conductivity decreases first and then increases as the mass fraction of additive increases. The best doped mass fraction of additive that corresponds to the lowest value of total conductivity is found to be the function of temperature. Temperature has very significant effect on radiative heat transfer. As temperature increases, radiative conductivity rises rapidly which leads to the deterioration of insulating performance at high-temperature environment. Fiber diameter and opacifier particle diameter also influence the insulating performance significantly. With small fiber diameter and particle diameter, the extinction effect of additive on radiative heat transfer becomes more significant and the insulating performance becomes better.

Elastic Modulus Prediction Based on Thermal Conductivity for Silica Aerogels and Fiber Reinforced Composites

Thermal Conductivity of Silica-aerogel (SA) and Autoclave Aerated Concrete (AAC) Composites

An experimental investigation and fractal modeling on the effective thermal conductivity of novel autoclaved aerated concrete (AAC)-based composites with silica aerogels (SA)

A Theoretical Model for the Effective Thermal Conductivity of Silica Aerogel Composites

Prediction of Thermal Conductivity of Fiber/Aerogel Composites for Optimal Thermal Insulation

Numerical Predictions of Thermal Conductivities for the Silica Aerogel and Its Composites

Predicting Thermal Conductivity of Fiber-reinforced Aerogel Composite Materials

Mechanical Properties of Silica Aerogel – A Molecular Dynamics Study

Study on Unit Cell Models and the Effective Thermal Conductivities of Silica Aerogel

Determination of the Young's Modulus of Silica Aerogels – an Analytical–numerical Approach

Enhanced Thermal Characterization of Silica Aerogels Through Molecular Dynamics Simulation

Studies on Thermal Property of Silica Aerogel/Epoxy Composite

Characterization of Mechanical Properties of Silica Aerogels

Theoretical Study on Thermal Conductivities of Silica Aerogel Composite Insulating Material

Experimental Study of the Influence of Additives on the Thermal Conductivity of Silica Aerogel Composite

Thermal Conductivity of Fiber and Opacifier Loaded Silica Aerogel Composite

Investigation of High Temperature Thermal Insulation Performance of Fiber-Reinforced Silica Aerogel Composites

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold

An analytical model for combined radiative and conductive heat transfer in fiber-loaded silica aerogels

Thermal Insulation Performance of Silica Aerogel Composites Doped with Hollow Opacifiers: Theoretical Approach

Synthesis and Heat Insulation Performance of Glass Fiber Reinforced SiO2 Aerogel Composites