Abstract:The tensile strength, crack behavior, and strain-hardening properties of ultra-high-performance concrete (UHPC) are mainly affected by the steel fibers distributed in the matrix. In this study, a mesoscopic model of UHPC was established using a numerical simulation method to study the effects of steel fibers on the crack propagation and tensile properties of UHPC. First, the exponential cohesive model was used to simulate the pull-out of a fiber embedded in a UHPC matrix. Then, the distribution and variation of the interfacial shear stress during the fiber pull-out process were obtained, and the UHPC fiber-pull-out load–displacement curve was obtained. Using the Monte Carlo method, a meso-scale finite element model of UHPC was established by modeling randomly distributed steel fibers in the UHPC matrix. After verification, the model was used to study the effects of fiber characteristics, interface strength, and matrix strength on the crack propagation path and tensile properties of UHPC. The results showed that the exponential cohesive constitutive model with a softening coefficient of –1 can effectively characterize the mechanical behavior of the interface between the steel fibers and matrix in UHPC. Affected by the random distribution of fibers, the main propagation mode of cracks in UHPC was that the cracks bypassed the fiber-dense area and extended to the fiber-sparse area, and the crack propagation path was mainly affected by the fiber distribution. The distribution of fibers significantly affected the tensile strength and peak strain of UHPC. When the fiber inclination angle was in the range of 15°–30°, the comprehensive tensile properties of UHPC were the best. With increasing fiber volume fraction and fiber length, UHPC gradually began to exhibit multi-cracking and strain hardening (when the fiber volume fraction was more than 2.5% or fiber length was more than 15.5 mm). The interface strength and matrix strength had little effect on the crack propagation path, but had significant effects on the tensile strength and toughness of the UHPC. The higher the strength of the UHPC matrix, the more fully the anti-cracking effect of the steel fiber that can be achieved.

Effects of Fibre Orientation on Tensile Properties of Ultra High Performance Fibre Reinforced Concrete Based on Meso-Scale Monte Carlo Simulations

Keynote: EXPLICIT MODELLING OF FIBRE PULLOUT IN CEMENTITIOUS COMPOSITES

3D meso-scale investigation of ultra high performance fibre reinforced concrete (UHPFRC) using cohesive crack model and Weibull random field

Experimental Evaluation of the Effectiveness of Fiber Orientation Methods on the Mechanical Performance of UHPFRC

Investigation on fracture behaviour of UHPFRC using a mesoscale computational framework

Direct validation of 3D meso -scale fracture modelling of UHPFRC by in-situ micro X-ray CT wedge-split tests and parametric studies

Multiscale study of fibre orientation effect on pullout and tensile behavior of steel fibre reinforced concrete

Influence of fibers on tensile behavior of ultra-high performance concrete: a review

Effect of Steel Fibre with Different Orientations on Mechanical Properties of 3D-Printed Steel-Fibre Reinforced Concrete: Mesoscale Finite Element Analysis

Meso-scale Modelling of Fibre Pull Test from Mortar Matrix

A discrete-continuum coupled finite element modelling approach for fibre reinforced concrete

Prediction of fiber orientation and flexural performance of UHPC based on suspending mortar rheology and casting method

Fracture Behavior and Size Effect of UHPFRC: Experimental and Mesoscale Numerical Investigation

Effect of Steel Fibers on the Stress-Strain Behavior of Aligned Steel Fiber Ultra-High Performance Concrete under Uniaxial Compression

Ultra-High-Performance Concrete Crack Propagation Based on Fiber Random Distribution Model

Contribution of Fiber Orientation to Enhancing Dynamic Properties of UHPC under Impact Loading

Effect of Aspect Ratios of Hooked End and Straight Steel Fibers on the Tensile Strength of UHPFRC

Investigation into the Effect of Fibre Distribution on the Post-Cracking Tensile Strength of SFRC Through Physical Experimentation and Numerical Simulation

Tensile Behavior of Ultra-High-performance Fiber-Reinforced Concrete (UHPFRC) Structure with Cold Joints

Tensile Behavior of Uhpfrc Made by a Fiber Orientation Device with Adjustable Vibrational Frequency

Investigation of orientation coefficient on meso-damage evolution of steel fiber-reinforced cement composites