Abstract:Using light to dynamically and stably redirect the flow of another beam of light is a long-term goal for photonic-integrated circuits. However, it is challenging to realize a practically all-optical switching device in silicon owing to its weak optical nonlinearity. Major published work on all-optical switches were using single-photon absorption and two-photon absorption, which requires ultrahigh switching energy. This paper presents a nano-silicon-photonic all-optical switch driven by an optical gradient force, in which a fast switching speed with low power consumption is obtained. Each switching element is composed of a waveguide crossing connection and a micro-ring resonator. The ring resonator is side-coupled to a double-etched waveguide crossing, while the micro-ring resonator is partially released from the substrate and becomes free-standing. When the “drop” port is in “OFF” state, the wavelength of the signal light from the “input” port does not satisfy the resonant condition in the micro-ring. Therefore, light is mainly transmitted to the "thru" port without control light. When a control light is loaded to the “add” port, of which the wavelength satisfies the resonance condition in the micro-ring, a strong optical gradient force is generated by the induced evanescent optical field. The freestanding arc of the ring is then bent down to the substrate, leading to a cavity resonance wavelength shift. As a result, the signal light is diverted to the “drop” port and the corresponding transmission state is switched to the “ON” state. The optical switch is fabricated by nano-photonic fabrication processes using standard silicon-on-insulator (SOI) wafer. The waveguide structures have a width of 450 nm and a height of 220 nm for a single mode transmission; the outer radius of the ring in the switching element is 15 μm; the coupling gap between the ring and the nano-waveguide is 200 nm; the system is fabricated through two-step lithography and plasma dry etching processes while the free-standing arc is released by undercutting the buried oxide layer. #br#A switching time of 180 ns(rise) and 170 ns (fall) is experimentally demonstrated, which is much faster than that of conventional optical switches. The present optical switch can reach a high extinction ratio (10.67 dB) and a low crosstalk (-11.01 dB). In addition, the proposed switch has the advantages of compact size and low power consumption. Potential applications of this optical switch include photonic integrated circuits, signal processing, and high speed optical communication networks.

Bending Mechanism of Optically Actuated All-Optical Mechanical Switches Composed of Bilayer Waveguides

Bending Behavior and Its Effect on Switching Performance of an All-Optical Switch

Optomechanical Coupling Behavior of Multilayer Nano-Waveguides

How Bending Deformation Affects the Performance of Polarization Converters Based on Slot Waveguides

Finite Element Simulation and Theoretical Analysis of Fiber-Optical Switches

Optical Switch of Low-Insertion-loss Based on the Brewster Angle Effect

Optimal Design for the Two Degrees-of-freedom Optical Switch

Study on LiNbO3 1×2 asymmetrical electrode Y branch digital optical switch

Study of a Novel Gradient Electric Field-controlled Optical Switch

Simulation and optimization of a polymer directional coupler electro-optic switch with push–pull electrodes

Investigation of Polymer-Based 1×2 All-Optical Switches at C-Band Wavelength

Multi-Physical Models of Bending Characteristics on the Double-Clamped Beam Switch for Flexible Electronic Devices Application

Effect of exceptional point on the performance of a bistable all-optical switch

Design of a Polymer Directional Coupler Electro-Optic Switch with Low Push-Pull Switching Voltage at 1550nm

Symmetrical Design And Analysis Of A Novel Mems-Based 1x2 Optical Switch

Analysis of All-optical Switching in PPLN Waveguide with Phase-Mismatched Condition

A Nano-Silicon-photonic Switch Driven by an Optical Gradient Force

Micro-Opto-Mechanical Grating Switches

Optimal Design For The Optical Switch

Light-Induced Bending and Smart Control of Photochromic Liquid Crystal Elastomers

Modeling Of Optical Mirror And Electromechanical Behavior