Acoustic Modeling of Sequential Spaces: A Parametric Study

Tingting Yang,Jian Kang
DOI: https://doi.org/10.1016/j.buildenv.2021.108733
IF: 7.093
2021-01-01
Building and Environment
Abstract:Sound field modeling of sequential spaces is required for large-scale public buildings. A finite element model comprising five successive rooms was used for a parametric study considering, contextual factors (opening dimension and position, number of rooms), acoustic (absorption coefficient and distribution) and source factors (directional radiation from the opening and an additional source), with the following results: (i) In rooms with high absorption, the average sound pressure level (SPL) of the rooms is higher, and the level difference between rooms is smaller with larger opening dimensions. The opening position has a significant impact only for rooms with low absorption. (ii) The level differences between rooms are larger for oblique than horizontal radiation, especially for rooms close to the source. With an additional source (e.g., a heating, ventilation, and air conditioning system or human speech) in a room, the level in that room will be maintained or reduced by approximately-10 dB with increasing opening dimensions for high or low room absorption, respectively, whereas levels in other rooms increase for high room absorption. (iii) Changes to low absorption coefficients have more significant effects. For a given absorption amount, the difference in average SPL in a room between uniform and nonuniform absorption distribution are greater with smaller opening dimensions. (iv) The effect on the average SPL in the first receiving room, caused by adding more sequential rooms is less when the absorption in those rooms is high (e.g., an absorption coefficient of 0.5), and the maximum difference with different absorption coefficients is-6 dB, depending on the number of rooms.
What problem does this paper attempt to address?