Abstract:<p>Recent studies on plate-type metastructures have shown promising applications in low-frequency sound insulation, as they possess a low-frequency sound transmission loss (STL) that is considerably higher than that derived from the mass law. To design a plate-type metastructure for a sound insulation application, three problems are worth exploring: 1) how to predict efficiently the STL of the metastructure, 2) how to understand its unusual STL behavior, and 3) how to design its parameters to obtain a high STL at a target frequency and achieve a broad frequency band of high STL without increasing the mass. The purpose of this work is to address these problems by investigating a plate-type metastructure that is simply constructed using a periodic array of mass blocks attached to a thin host plate. For the first problem, a semi-analytical method is proposed for efficient prediction of normal, oblique, and diffuse STL based on fast retrieval of dynamic surface mass density using a considerably reduced structural finite element model and without having to include the acoustic field. This method is validated based on comparisons with an existing numerical method and reported experimental data. For the second problem, the mechanisms of unusual STL behavior are revealed by analyzing dynamic surface mass density as well as Bloch wave dispersion and Bloch modes. The third problem is addressed by conducting an elaborate parametric analysis that provides straightforward guidelines for adjusting structural parameters to tune the STL peak frequency as well as offering general guidelines for designing multiple parameters to achieve a broader frequency band of high diffuse STL with a given surface mass density. A design guideline for improving STL bandwidth is experimentally validated through measurements of two specimens designed and fabricated with identical surface mass densities. Because the considered plate-type metastructure is simple yet instructive, these investigations and findings are of fundamental and practical interest to the design of sound insulation metastructures.</p>

Scale modelling for improving the speech intelligibility from multiple loudspeakers in long enclosures by architectural acoustic treatments

Scale model studies on sound absorption of theater proscenium opening

Ceiling baffles and reflectors for controlling lecture-room sound for speech intelligibility

Modelling the Acoustic Properties of Baffles Made of Porous and Fibrous Materials

A coherent model of sound propagation in long enclosures with different acoustics boundaries

Noise Control in Enclosures: Modeling and Experiments with T-shaped Acoustic Resonators

Investigating the Potential of Transparent Parallel-Arranged Micro-Perforated Panels (MPPs) as Sound Absorbers in Classrooms

Acoustic modelling and analyses of geometrically complex systems with Micro-perforated panels

The speech intelligibility and applicability of the speech transmission index in large spaces

Scale-model research on infrasonic resonance of the noise reduction workshop for the gas compressor

Speech Privacy in Open-Plan Offices. II. Developing a Model

Experimental study of active acoustic wedge

Sound transmission loss of plate-type metastructures: Semi-analytical modeling, elaborate analysis, and experimental validation

Control of interior surface materials for speech privacy in high-speed train cabins

Sound absorption performance based on Auxetic microstructure model: a parametric study

An acoustic impedance design method for tubular structures with broadband sound insulations and efficient air ventilation

Improving the Performance of an Active Staggered Window with Multiple Resonant Absorbers

A 2.5D acoustic finite element method applied to railway acoustics

Case study of acoustics in two very large atriums

Contributions of various transmission paths to speech privacy of open ceiling meeting rooms in open-plan offices

Acoustic Simulation Study of Subway Underwater Tunnels Based on EASE