Abstract:Physically Unclonable Functions (PUFs) have proved to be an effective and low-cost measure against counterfeiting by providing device authentication and secure key storage services. Memory-based PUF implementations are an attractive option due to the ubiquitous nature of memory in electronic devices and the requirement of minimal (or no) additional circuitry. Dynamic Random Access Memory-- (DRAM) based PUFs are particularly advantageous due to their large address space and multiple controllable parameters during response generation. However, prior works on DRAM PUFs use a static response-generation mechanism making them vulnerable to security attacks. Further, they result in slow device authentication, are not applicable to commercial off-the-shelf devices, or require DRAM power cycling prior to authentication. In this article, we propose D-PUF, an intrinsically reconfigurable DRAM PUF based on the idea of DRAM refresh pausing. A key feature of the proposed DRAM PUF is reconfigurability, that is, by varying the DRAM refresh-pause interval, the challenge-response behavior of the PUF can be altered, making it robust to various attacks. The article is broadly divided into two parts. In the first part, we demonstrate the use of D-PUF in performing device authentication through a secure, low-overhead methodology. In the second part, we show the generation of true random numbers using D-PUF. The design is implemented and validated using an Altera Stratix IV GX FPGA-based Terasic TR4-230 development board and several off-the-shelf 1GB DDR3 DRAM modules. Our experimental results demonstrate a 4.3×-6.4× reduction in authentication time compared to prior work. Using controlled temperature and accelerated aging tests, we also demonstrate the robustness of our authentication mechanism to temperature variations and aging effects. Finally, the ability of the design to generate random numbers is verified using the NIST Statistical Test Suite.

A Promising PE-PUF Structure Based on High Precision Delay Measurement

Techniques for Design and Implementation of an FPGA-Specific Physical Unclonable Function

Design and Implementation of a Delay-Based PUF for FPGA IP Protection

A Highly Reliable Strong Physical Unclonable Function Design Based on FPGA

CycPUF: Cyclic Physical Unclonable Function

Area-Efficient Delay-based PUF Based on Logic Gates

An Efficient Framework For Configurable Ro Puf

Design and Implementation of High Efficiency PUF Circuit on FPGA

Hardware Implementation of Physical Unclonable Function on FPGAs

D-PUF: An Intrinsically Reconfigurable DRAM PUF for Device Authentication and Random Number Generation.

A Response-Feedback-Based Strong PUF with Improved Strict Avalanche Criterion and Reliability

A Physical Layer Analysis of Entropy in Delay-Based PUFs Implemented on FPGAs

DRAM-Based PUF Utilizing the Variation of Adjacent Cells

Locking Secret Data in the Vault Leveraging Fuzzy PUFs

M-RO PUF: A portable pure digital RO PUF based on MUX unit

Design and Implementation of a Group-Based RO PUF

Design Guidelines and Feedback Structure of Ring Oscillator PUF for Performance Improvement

A Machine Learning Attack Resistant Dual-mode PUF

A Time-delay based RRAM PUF Circuit

A 0.09-Pj/bit Logic-Compatible Multiple-Time Programmable (MTP) Memory-Based PUF Design for IoT Applications

Reliable and Anti-cloning PUFs Based on Configurable Ring Oscillators