Abstract:Photopolymerization is a widely used polymerization method in many engineering applications such as coating, dental restoration, and 3D printing. It is a complex chemical and physical process, through which a liquid monomer solution is rapidly converted to a solid polymer. In the most common free-radical photopolymerization process, the photoinitiator in the solution is exposed to light and decomposes into active radicals, which attach to monomers to start the polymerization reaction. The activated monomers then attack CC double bonds of unsaturated monomers, which leads to the growth of polymer chains. With increases in the polymer chain length and the average molecular weight, polymer chains start to connect and form a network structure, and the liquid polymer solution becomes a dense solid. During this process, the material properties of the cured polymer change dramatically. In this paper, experiments and theoretical modeling are used to investigate the free-radical photopolymerization reaction kinetics, material property evolution and mechanics during the photopolymerization process. The model employs the first order chemical reaction rate equations to calculate the variation of the species concentrations. The degree of monomer conversion is used as an internal variable that dictates the mechanical properties of the cured polymer at different curing states, including volume shrinkage, glass transition temperature, and nonlinear viscoelastic properties. To capture the nonlinear behavior of the cured polymer under low temperature and finite deformation, a multibranch nonlinear viscoelastic model is developed. A phase evolution model is used to describe the mechanics of the coupling between the crosslink network evolution and mechanical loading during the curing process. The comparison of the model and the experimental results indicates that the model can capture property changes during curing. The model is further applied to investigate the internal stress of a thick sample caused by volume shrinkage during photopolymerization. Changes in the conversion degree gradient and the internal stress during photopolymerization are determined using FEM simulation. The model can be extended to many photocuring processes, such as photopolymerization 3D printing, surface coating and automotive part curing processes.

Model of UV-curing Thickness for New Thiol-Ene Resin for Additive Manufacturing of Energetic Materials

Numerical Simulation on Solvent Diffusion during Polymeric Coating Curing Processes

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Model of Curing Shrinkage and Kinetic Parameters of an Acrylate-Based Ultraviolet-Embossing Resist Based on Free Volume Theory

Photocurable High-Energy Polymer-Based Materials for 3D Printing

Photo-assisted Ultrasonic Curing for Ultrafast and Deep Prototyping Based on Coumarin Derivatives

Synthesis and properties of a low-viscosity UV-curable oligomer for three-dimensional printing

Simulation of UV curing of photosensitive resins with phase change materials

Modeling and measurement of curing properties of photocurable polymer containing magnetic particles and microcapsules

Highly Tunable Thiol‐Ene Photoresins for Volumetric Additive Manufacturing

A New Diffusion-Control Model Based on the Power Law Distribution for the Cure Kinetics of Epoxy-Anhydride Thermoset Resins

Evolution of Material Properties During Free Radical Photopolymerization

Model-fitting Kinetic Analysis of Novel Phosphorus-Containing Curing Agent for Epoxy Resin

Experimental and Simulation Investigations on the Morphology of Aerosol Jet Printed Polymer Traces under In-Situ UV and Thermal Curing Conditions

Experimental Investigation of Mechanical Properties of UV-Curable 3D Printing Materials

Development of Dual-curing Thermoset Materials using a Novel UV-initiated Mechanism Suitable for 3D Printing Applications

Influence of Cross-Linker Functionality and Photoinitiator Loading on Network Connectivity and Actuation in 3D-Printed Model Thermosets

Preparation and characterization of photocurable fluorinated polyether‐based reactive inks

Analysis of UV Curing Strategy on Reaction Heat Control and Part Accuracy for Additive Manufacturing

Theoretical prediction and experimental validation of the digital light processing (DLP) working curve for photocurable materials

Acrylate-based photosensitive resin for stereolithographic three-dimensional printing