Abstract:The rotating units type negative Poisson's ratio structures are firstly prepared by continuous fiber 3D printing technology. The influences of the printing path on the Poisson's ratio, elastic modulus and energy absorption of the structures under compression are systematically researched. The printed CFNPRSs with a lower relative density of 0.18 has an even better negative Poisson's ratio effect than the existing 3D printed fiber‐reinforced auxetic structures. In this work, continuous fiber reinforced thermoplastic negative Poisson's ratio structures (CFNPRSs) with rotating squares are fabricated by 3D printing based on a symmetrical orthogonal and one‐stoke path planning method. The influences of the printing path on the Poisson's ratio, elastic modulus and energy absorption of the structures under compression are systematically researched. The distribution of continuous fiber at the hinge has a great influence on the compression behavior of the structures. As the number of cross laps of continuous fibers at the hinge increases, the negative Poisson's ratio effect decreases while the elastic modulus and energy absorption increase. The printed CFNPRSs with no cross lap have the most obvious negative Poisson's ratio effect, with an average Poisson's ratio of −0.61. A comparative study on Poisson's ratio of the 3D printed polylactic acid negative Poisson's ratio structures (PANPRSs) is carried out, and the results show that the PANPRSs cannot achieve the negative Poisson's ratio effect because the insufficient stiffness of the printed rotation units violates the rigid assumption in theoretical model. Furthermore, the printed CFNPRSs with a lower relative density of 0.18 has an even better negative Poisson's ratio effect than the existing fiber‐reinforced auxetic structures fabricated by 3D printing. This work can provide a significant reference for the preparation of lightweight functional structures using 3D printing. Highlights The CFNPRSs with rotating squares are prepared by 3D printing technique. The path planning of the fiber at the hinge affects the properties of CFNPRSs. The negative Poisson's ratio of CFNPRSs is more obvious than that of PANPRSs. The relative density and Poisson's ratio of CFNPRSs have obvious advantages.

A Horizontal Punch on a Layered and Orthotropic Composite System with Negative Poisson’s Ratio

A Porous Layer of Negative Value of Poisson’s Ratio under a Flat-Ended and Rigid Cylinder Indenter

Out-of-plane Punching Simulation Based on a Layered-Shell Model

A Note on the Elastic Contact Stiffness of a Layered Medium

Electromechanical Behaviour of a Finite Piezoelectric Layer under a Flat Punch

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

Anti-Plane Mechanical and In-Plane Electrical Fields for A Finite Electrode/Punch on A Finite Piezoelectric Layer

Investigation of the generalized solution behavior for the transverse deflection of a rigid-plastic clamped plate: Eccentric and multiple punches loading

Failure Analysis of Thickness Gradient Negative Poisson's Ratio Concave Honeycomb Sandwich Panels Under Local Impact

Study on dynamic compression behavior and energy absorption characteristics of three negative Poisson’s ratio materials under different velocities

Post-punching Failure Mechanism and Resistance of Flat Plate-Column Joints with In-Plane Constraints

Contact problem of two punches in an elastic coating attached to a porous material

Properties of 3D Double-Arrow Negative Poisson’s Ratio Lattice Structure under Quasi-Static Compression and Low-Speed Impact

Auxetic Composite Laminates with Through-Thickness Negative Poisson's Ratio for Mitigating Low Velocity Impact Damage: A Numerical Study

The Use Of Flat Punch Indentation To Determine The Viscoelastic Properties In The Time And Frequency Domains Of A Soft Layer Bonded To A Rigid Substrate

Modelling the needling effect on the stress concentrations of laminated C/C composites

Mechanics Characteristics of a 3D Star-Shaped Negative Poisson's Ratio Composite Structure

Effect of printing path on compressive properties of 3D printed continuous fiber composite negative Poisson's ratio structure

Design and Fatigue Analysis of Diagonally Reinforced Structures with a Negative Poisson’s Ratio Lattice Material

Buckling and Vibration Characteristic of Anisotropic Sandwich Plates with Negative Poisson's Ratio Based on Isogeometric Analysis

A novel 3D impact energy absorption structure with negative Poisson’s ratio and its application in aircraft crashworthiness