Quantifying the thermochemical pathways of soluble organics in sewage sludge flocs during pyrolysis for precursor optimization and by-product control

Zhihang Yuan,Zhongyue Zhou,Haiping Yuan,Nanwen Zhu,Ziyang Lou
DOI: https://doi.org/10.1016/j.cej.2022.136627
IF: 15.1
2022-01-01
Chemical Engineering Journal
Abstract:The composition of sewage sludge is complex, and understanding the product contribution and pyrolysis pathways of typical components in sludge are important for product quality improvement and contaminant volatiles control. Here, three major sludge organics, i.e., protein (PR), polysaccharide (PS), and humic acid (HA), were extracted and pyrolyzed individually to quantify the correlation between sludge components and products. The temperature-response and sludge inorganics-response of pyrolysis processes were elucidated simultaneously. The main contributor to the carbonaceous components in char shifted from PR (from 51% to 7%) to HA (from 27% to 78%) as temperature increased from 250 degrees C to 850 degrees C. Over 95% tar and 70% gas were originated from PR and PS at temperature above 550 degrees C. Regarding the effect of inorganic matters, Ca/Si/Al-containing inorganics were the major inducement for the formation of nitrogenous tars and NOx, whereas polyferric chloride retained sludge organics in the carbon matrix in the form of C-C/C = C and heterocyclic-N/S, thus reducing the generation of volatiles. Based on pyrolysis product evolution and elemental flow analysis, sludge rich in HA and low in Ca/Si/ Al-containing inorganics was found to be a promising source for carbonization at 550-850 degrees C, while PR/PS-rich sludge was more suitable for pyrolysis or liquefaction at below 550 degrees C. These findings provided reliable strategies for pyrolysis precursor selection, gas emission control, and potential application of pyrolysis product.
What problem does this paper attempt to address?