Abstract:Recently, shrinking reserves of crude oil have led to increased interest in the utilisation of various unconventional resources. Oil shale is one of these promising alternatives to crude oil. However, the transformation of S/N that takes place during the oil shale pyrolysis cannot be ignored since they contribute to the release of harmful gases and production of poor-quality shale oil. In order to study the mechanism of S/N migration during pyrolysis, S/N species in the pyrolysates produced from the Longkou oil shale were qualitatively and quantitatively examined over a temperature range of 340–520 °C. The results revealed that a majority of the S retained in char during pyrolysis was primarily present as aromatic S, sulfone and sulfate. Aromatic S in the char decreased when at a temperature below 460 °C and increased when in the 460–520 °C range; sulfone in the char increased during the initial stage and decreased in the last stage; and sulfate in the char showed a fluctuating pattern. At lower temperatures (≤400 °C), more gases (H2S, CH3SH and COS) were produced via the decomposition of pyrite and cleavage reactions of aliphatic and aromatic S, when compared with the liquid S species. At higher temperatures (≥400 °C), an increasing amount of S migrated to shale oil, with the most abundant form being thiophenes. Concerning the transformation of N during pyrolysis, abundant N was present in the char, with a predominant occurrence of pyrrolic N. At temperatures below 340 °C, the pyrrolic N in the char was seen to change slightly, while when the temperature increased from 340 °C to 520 °C, it decreased significantly. By raising the temperature in the tested range, the N compounds were promoted to migrate into both shale oil and gas, and the production of liquid N species was recorded as higher than that of gaseous N (NH3 and HCN), especially after surpassing 400 °C. More non-basic or weak basic N species, such as indoles, carbazoles and aliphatic nitriles, were present in shale oil than basic N species (anilines and quinolines). These findings suggest that regulating and controlling S/N transformation during oil shale pyrolysis would improve the quality of shale oil. In addition, it would provide basic data to be used in the subsequent processing for the efficient and clean utilisation of oil shale.

Evolution of S/N Containing Compounds in Pyrolysis of Highly Oily Petroleum Sludge

Investigation of oxygen-enriched atmosphere combustion of oily sludge: Performance, mechanism, emission of the S/N-containing compound, and residue characteristics

Nitrogen transformation during pyrolysis of oilfield sludge with high polymer content

Pyrolysis Characteristics and Products Distribution of Petroleum Sludges

Emission characteristics of nitrogen and sulfur containing pollutants during the pyrolysis of oily sludge with and without catalysis

Investigation on the Evolution of N-Containing Organic Compounds During Pyrolysis of Sewage Sludge

Character and Composition Analysis of Distilling Fractions from Sewage Sludge Pyrolysis Oil

Investigation of pyrolytic characteristics of three oily sludges with focus on properties of oil product

Petroleum oil and products recovery from oily sludge: Characterization and analysis of pyrolysis products

Pyrolysis properties of oil sludge

Ex-Situ Catalytic Pyrolysis of Wastewater Sewage Sludge - A Micro-Pyrolysis Study

Pyrolysis Behaviors of Oil Sludge Based on TG/FTIR and PY-GC/MS

Continuous Catalytic Pyrolysis of Oily Sludge Using U-shape Reactor for Producing Saturates-Enriched Light Oil

Mechanisms of sulfur and nitrogen transformation during Longkou oil shale pyrolysis

Components of Oil Sludge and Their Influence on Pyrolysis Behaviors

Pyrolysis Performance and Kinetic Analysis of Oily Sludge

Progress in Thermal Analysis Studies on the Pyrolysis Process of Oil Sludge

Effect of Wastewater Treatment Processes on the Pyrolysis Properties of the Pyrolysis Tars from Sewage Sludges

Nitrogen, sulfur, chlorine containing pollutants releasing characteristics during pyrolysis and combustion of oily sludge

Hazardous elements flow during pyrolysis of oily sludge

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.