Enhancing the Leaching Performance of Molybdenite and Co-white Alloy Simultaneously: A Structure Conversion Process

Dingchuan Zhang,Fenglong Sun,Zhongwei Zhao,Xuheng Liu,Xingyu Chen

DOI: https://doi.org/10.1016/j.mineng.2022.107543

IF: 5.479

2022-01-01

Minerals Engineering

Abstract:Molybdenite (MoS2), driven by its unique sandwich structure, is chemical inert and hydrophobic leading to a high refractory sulfide ore, and Co-white alloy, due to its grinding and corrosion resistance, is a refractory product (mainly containing Co, Fe, Cu and Si) for use in traditional hydro-metallurgical processing. In this work, a novel, two-step process was proposed to enhance the leaching performance of both molybdenite and Co-white alloy. First, prior to leaching and based on the sulfur affinity of Co, Fe and Cu, molybdenite and Co-white alloy were converted into ternary sulphides (MxMo6S8) with high leaching activity. Second, a leaching process was carried out in an autoclave with oxygen as the oxidant. Compared to molybdenite and Co-white alloy, the leaching performance of the ternary sulfides was greatly improved under moderate conditions. During the leaching of ternary sulfides, the sulfur is partially converted to elemental sulfur, which is unlike the acid leaching process of molybdenite where sulfur is oxidized to sulfuric acid. Factors affecting the decomposition of ternary sulfide were also studied in detail under moderate conditions. The optimal leaching conditions were found to be a temperature of 120 degrees C, a sulfuric acid concentration of 1 mol/L, a duration of 150 min, and an oxygen partial pressure of 0.95 MPa. The oxidation efficiency of molybdenum reached 99%, the elemental sulfur yield was 55%, and the leaching efficiencies of cobalt and copper were both greater than 99%.