Abstract:As a key factor affecting thermal behaviors of liquid hydrogen (LH2) tanks, heat leakage plays an important role in accurate prediction of pressure build-up for safe storage and transportation of LH2. Uniform heat flux between vapor and liquid in LH2 tanks is widely adopted as thermal boundary condition in predicting pressure build-up process. However, a distribution of heat flux between vapor and liquid was observed during the self -pressurization process in the experimental test. In light of this, an analytically theoret-ical model of revealing the energy exchange process among the vapor, liquid and inner wall is proposed to investigate the heat leakage distribution ratio (HDR) between vapor and liquid in LH2 tanks. The feasibility of the model is validated by the experimental results from NASA. In the whole self-pressurization process of 25,000 s, HDR reduces from 0.803 to 0.235 under a liquid fill ratio of 90% and a total heat leakage of 71.3 W. The results show that the existence of inner wall and different thermal properties between the vapor and liquid make the heat leakage flux non-uniformly distributed into the vapor and liquid. And the geometric structure of tank, thermal properties and initial states of the vapor and liquid have a significant effect on HDR. When coupling the model with thermal multi-zone model, the relative error in pressure prediction is reduced by 61.8% against experimental results. Benefiting from the coupled model, the relative error in pressure prediction caused by the uniform heat flux boundary condition reduces from 90.16% to 8.15%. The present work establishes theoretical foundation on analyzing heat leakage distribution between the vapor and liquid for LH2 tanks, and provides useful guidance on modifying boundary conditions in accurately predicting thermal behaviors of LH2 tanks.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Transient Flow Behaviors of the Check Valve with Different Spool-Head Angle in High-Pressure Hydrogen Storage Systems

Transient Flow Characteristic of High-Pressure Hydrogen Gas in Check Valve During the Opening Process

Study on the High-Pressure Hydrogen Gas Flow Characteristics of the Needle Valve with Different Spool Shapes

Numerical Study of Hydrogen Leakage and Explosion in Hydrogen Refueling Station with Large Volume Hydrogen Storage Vessels

Numerical Analysis of Flow and Temperature Characteristics in a High Multi-Stage Pressure Reducing Valve for Hydrogen Refueling Station

Transient Flow Dynamics Behaviors During Quick Shut-off of Ball Valves in Liquid Hydrogen Pipelines and Storage Systems

Parametric Analysis on Throttling Elements of Conical Throttling Valve for Hydrogen Decompression in Hydrogen Fuel Cell Vehicles

Numerical Simulation on the Leakage and Diffusion of Hydrogen in Indoor Environment

Parametric study on Tesla valve with reverse flow for hydrogen decompression

Numerical Investigation of Cavitation Flow Inside Spool Valve with Large Pressure Drop

Hydrogen Decompression Analysis by Multi-Stage Tesla Valves for Hydrogen Fuel Cell

Effects of Valve Disc on Flow Characteristics Inside a Swing Check Valve During Opening and Closing Processes

Evaluation of the Viscous Heating Induced Jam Fault of Valve Spool by Fluid–structure Coupled Simulations

Unbalanced Force Analysis on Valve Core Clamping in Hydraulic Spool Valves

Parametric analysis on multi-stage high pressure reducing valve for hydrogen decompression

Mach number and energy loss analysis inside multi-stage Tesla valves for hydrogen decompression

Theoretical investigation on heat leakage distribution between vapor and liquid in liquid hydrogen tanks

Comparison of numerical and algebraic models of low and high pressure hydrogen jet flows with ideal and real gas models

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

A numerical study of hydrogen leakage and diffusion in a hydrogen refueling station

Preliminary numerical study on hydrogen distribution characteristics in the process that flow regime transiting from jet to buoyancy plume in time and space