Abstract:Eutectic high-entropy alloys (EHEAs) are becoming a new research focus in the field of metal materials due to the outstanding casting properties, high fracture strength and high tensile ductility. In present study, a series of [FeNi] 75-x Cr 15 Mn 10 Nb x (x = 0, 3, 6, 9, 10, 12, 15, x value in molar ratio) Co-free high entropy alloys were fabricated and evaluated to investigate the alloying effect of Nb on microstructure and compression properties. With the addition of Nb, the microstructure changes from monophase to divorced eutectic with primary FCC phase and then to the hypoeutectic. With the further addition of Nb, the microstructure is almost eutectic (irregular eutectic + regular eutectic), and then transformed into hypereutectic with primary Laves phase. The compressive fracture strength of [FeNi] 75-x Cr 15 Mn 10 Nb x first increases and then decreases accompanied by the degradation of compressibility as the addition of Nb. The eutectic alloy [FeNi] 65 Cr 15 Mn 10 Nb 10 exhibited comprehensive mechanical properties with compressive fracture strength 1638 MPa and fracture strain 22%. The strengthening mechanism of the HEAs is mainly fine grain strengthening (Hall-Petch) and Laves phase strengthening, supplemented by FCC solid solution strengthening. The microstructure formation is explained by Md criterion, when Md is less than or equal to 0.89, the microstructure is composed of single FCC phase; when Md is greater than 0.89, the microstructures are composed of FCC + Laves phases.

A Novel Hypoeutectic High-Entropy Alloy CrFe2Ni2Mo0.3Nb0.25 with High Tensile Strength and Good Ductility

Microstructure and properties of a novel cost-effective FeNi-based eutectic high entropy alloys

A Novel Nano-Spaced Coherent FCC1/FCC2 Eutectic High Entropy Alloy

Novel (CoFe2NiV0.5Mo0.2)100−xNbx Eutectic High-Entropy Alloys with Excellent Combination of Mechanical and Corrosion Properties

Tailoring Phase Transformation and Precipitation Features in a Al21Co19.5Fe9.5Ni50 Eutectic High-Entropy Alloy to Achieve Different Strength-Ductility Combinations

A new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties

A New Al14Co28Cr28Ni30 Hypoeutectic High Entropy Alloy with Excellent Tensile Property

Effects of Mo on microstructure and mechanical properties of Fe<sub>2</sub>Ni<sub>2</sub>CrMo<sub>x</sub> eutectic high entropy alloys

Design of Novel Structural Eutectic High Entropy Alloys (eheas) Containing High-Temperature Resistant Alloying Elements

Microstructure and mechanical properties of Co-free AlCrFeNiTi 0.2 eutectic high-entropy alloy

Microstructure and Mechanical Properties of Co-Free Alcrfeniti0.2 Eutectic High-Entropy Alloy

Microstructure evolution and mechanical properties of CrFeNixV0.64Ta0.36 eutectic high-entropy alloys

Break the strength and ductility trade-off in novel NbC reinforced Fe40.5(CoCr)25Mn17.5Ni10Si5 high entropy alloy

A Novel Equiaxed Eutectic High-Entropy Alloy with Excellent Mechanical Properties at Elevated Temperatures

Novel Cost-Effective Fe-based High Entropy Alloys with Balanced Strength and Ductility

Affordable FeCrNiMnCu High Entropy Alloys with Excellent Comprehensive Tensile Properties

Microstructure and Tensile Mechanical Behavior of a Single-Phase Fe35Mn10Cr20Ni35 High-Entropy Alloy

Microstructure and properties of novel CoCrFeNiTax eutectic high-entropy alloys

Microstructure and mechanical properties variation with Ni content in Al<sub>0.8</sub>CoCr<sub>0.6</sub>Fe<sub>0.7</sub>Ni<sub>x</sub> (x = 1.1, 1.5, 1.8, 2.0) eutectic high-entropy alloy system

Effects of Mo on microstructure and mechanical properties of Fe2Ni2CrMox eutectic high entropy alloys

A Novel Fe20Co20Ni41Al19 Eutectic High Entropy Alloy with Excellent Tensile Properties