Abstract:Based on microbial induced carbonate precipitation (MICP), soil modification technology has attracted widespread concern in geotechnical engineering. This technology can not only improve the soil strength, stiffness, the properties of anti-liquefaction, anti-erosion and anti-permeability but also maintain good soil permeability and water permeability and improve the growth environment of the plants simultaneously. As the microbial mineralisation involves a series of complex biochemical and ion chemical reactions in the curing process, soil modification through MICP curing can be affected by many factors. In this paper, the effects of influence factors on the performance of microbial improved geomaterials were summarised, such as bacterial species, bacterial concentration, temperature, pH, the ratio of cement solution and soil properties, and their optimisation methods and future research direction were discussed as well. The conclusions are as follows. The bacteria type, bacteria concentration, temperature, pH, and the nature of the cement can affect the crystal type, crystal appearance, and size of calcium carbonates microscopically, and further affect the cementing effect of geomaterials macroscopically. The optimized conditions for strengthening the geomaterials are under the high bacteria concentration, the temperature from 20 degrees C to 40 degrees C, the pH from 7 to 9.5, and the concentration of the cementation solution within 1 mol/L. In the optimised range of those factors, the soil permeability is improved by relatively low temperature, high pH value, and low concentration of cementation solution, while the soil strength is enhanced by the relatively high temperature, low pH value and high concentration of cementation solution. The effective grain size ranges from 10 to 1 000 mu m, and the relatively large size and good gradation can promote the consolidation effect. The methods of multi-phase grouting, multi-concentration grouting and electroosmosis grouting improve the uniformity of soil solidification. The grouting speed below 0.042 mol/L/h is beneficial to improve the utilization ratio of the cement solution. The grouting pressure of the sand specimen is generally between 10 kPa similar to 30 kPa bar, the grouting pressure of the silt and clay specimen should not exceed 110 kPa, and the high grouting pressure destroys the structure of soil and reduces the curing effect.

Effect of Microbial-Cemented on Mechanical Properties of Iron Tailings Backfill and Its Mechanism Analysis

Experimental Study on Cemented Tailings Backfill Based on Microbially Induced Calcite Precipitation

Recycling of Waste Iron Tailings by Biomineralization for Cemented Paste Backfill Production

Inhibition of cadmium releasing from sulfide tailings into the environment by carbonate-mineralized bacteria

Experimental Investigation of sample preparation and grouting technology on microbially reinforced tailings

Influence of phosphogypsum on mechanical properties and microstructure of iron tailings cementitious material

Study on comprehensive utilization of tailings by using bioleaching and microbial-cementation

Experimental study on the mechanical properties and consolidation mechanism of microbial grouted backfill

[Recent acquisitions on viral hepatitis].

Experimental Investigation on the Performance of Cement Mortar by Partial Replacement of the Standard Sands with Sulfide-Contained Iron Tailings

Experimental study on solidification and remediation of lead–zinc tailings based on microbially induced calcium carbonate precipitation (MICP)

Study on the modification effect and mechanism of tailings powder on coal gangue-based mining cementitious filling material

Factors Affecting Improvement In Engineering Properties Of Geomaterials By Microbial-Induced Calcite Precipitation

A preliminary study of solid-waste coal gangue based biomineralization as eco-friendly underground backfill material: Material preparation and macro-micro analyses

Soil improvement by microbially induced calcite precipitation (MICP): a review about mineralization mechanism, factors, and soil properties

Mechanical Properties and Hydration Mechanism of Iron Tailings–Cement-Based Supplementary Cementitious Materials

Bio-Mediated Method for Immobilizing Copper Tailings Sand Contaminated with Multiple Heavy Metals

Effect of microbial-induced calcite precipitation on shear strength of gold mine tailings

Experimental Study on the Influence of Microbial Content on Engineering Characteristics of Improved Expansive Soil

Improving the thermal-mechanical performance of bio-treated backfill materials by addition of magnetic iron oxide nanoparticles (nano-Fe 3 O 4 )

Experimental Study on the Effect of an Organic Matrix on Improving the Strength of Tailings Strengthened by MICP