Abstract:Ti–Mo–Zr alloys have attracted increasing interest for biomedical applications, due to their outstanding properties such as low elastic modulus. To improve the bioactivity of alloys, this study utilized the anodic oxidation method to fabricate porous micro/nano structures on the surface of a series of Ti–Mo–Zr alloys, including the Ti–12Mo-AO, Ti–10Zr-AO, and Ti–12Mo–10Zr-AO groups. The morphology, composition, phase, microhardness, roughness, wettability, adhesion strength, corrosion resistance, bioactivity, and biocompatibility of each group were systematically investigated. The formation mechanism of surfaces was discussed from the perspective of thermodynamics. Our results demonstrated that, Ti–12Mo-AO showed the structure of single-layer regularly arranged nanotubes, while Ti–10Zr-AO and Ti–12Mo–10Zr-AO exhibited a double-layer porous structure with a nano-filamentous upper layer and a densely arranged nanotube lower layer. With low crystallinity, these surfaces showed an amorphous structure and were composed of the oxides of corresponding matrix element. After anodizing, the microhardness and wettability of surfaces increased, while their corrosion resistance decreased. Compared with Ti–12Mo-AO, Ti–10Zr-AO and Ti–12Mo–10Zr-AO possessed a higher degree of roughness, better wettability, stronger interface bonding, and higher apatite forming ability. Furthermore, the biocompatibility of Ti–12Mo–10Zr-AO was superior to that of the other groups. Taken together, our results revealed that, under the same anodic oxidation condition, Ti–Mo–Zr alloys formed different porous micro/nano structures on the surface. Particularly, due to its favorable properties, Ti–12Mo–10Zr-AO is very attractive for future biomedical application.

Microstructural Evolution and Biocompatibility of Porous and Low-Cost Ti–MO and Ti–Mo–Fe Alloys

Relationship Between Mechanical Properties and Microstructure in a New High Strength Β Titanium Alloy

Microstructure, mechanical properties and biocompatibility of novel Ti-20Zr-xMo alloys

Microstructure and Mechanical Properties of Ti-Zr-Cr Biomedical Alloys.

Effect of Fe and Mo Additions on Microstructure and Mechanical Properties of Tial Intermetallics

Effect of Molybdenum on the Mechanical and Corrosion Properties of Ti-xMo-2Fe Beta Alloys

Microstructure Characterization and Property Tailoring of a Biomedical Ti–19Nb–1.5Mo–4Zr–8Sn Alloy

Fabrication of High Strength, Antibacterial and Biocompatible Ti-5Mo-5Ag Alloy for Medical and Surgical Implant Applications.

Preparation and characterization of metastable β-type titanium alloys with favorable properties for orthopedic applications

Influence of Mo content on microstructure and mechanical properties of β-containing TiAl alloy

Microstructure and Corrosion Resistance of Powder Metallurgical Ti-Nb-Zr-Mg Alloys with Low Modulus for Biomedical Application

Effects of Mo Contents on the Microstructure, Properties and Cytocompatibility of the Microwave Sintered Porous Ti-Mo Alloys.

Construction of porous micro/nano structures on the surface of Ti–Mo–Zr alloys by anodic oxidation for biomedical application

Microstructures and Mechanical Properties of Titanium Alloys Ti-Mo for Dental Use

A Comparative Study on Microstructure and Mechanical Properties of Ti-43/46Al-5Nb-0.1B Alloys Modified by Mo

Microstructure evolution and corrosion behaviour of a high Mo containing α + β titanium alloy for biomedical applications

Joint Effect of Mo and Cr on Microstructure and Properties of Ti–Al–Mo–Cr–B Alloys

The Microstructure, Mechanical Properties, and Corrosion Resistance of a Novel Extruded Titanium Alloy

Development of new β Ti-10-Mo-Mn alloys for biomedical applications

Role of Mo and Zr Additions in Enhancing the Behavior of New Ti–Mo Alloys for Implant Materials

Microstructure and Properties of a Novel Ternary Ti–6Zr–xFe Alloy for Biomedical Applications