Abstract:With the rising demand for medical implants and the dominance of implant-associated failures including infections, extensive research has been prompted into the development of novel biomaterials that can offer desirable characteristics. This study develops and evaluates new titanium-based alloys containing gallium additions with the aim of offering beneficial antibacterial properties while having a reduced stiffness level to minimise the effect of stress shielding when in contact with bone. The focus is on the microstructure, mechanical properties, antimicrobial activity, and cytocompatibility to inform the suitability of the designed alloys as biometals. Novel Ti-33Nb-xGa alloys (x = 3, 5 wt%) were produced via casting followed by homogenisation treatment, where all results were compared to the currently employed alloy Ti-6Al-4V. Optical microscopy, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) results depicted a single beta (β) phase microstructure in both Ga-containing alloys, where Ti-33Nb-5Ga was also dominated by dendritic alpha (α) phase grains in a β-phase matrix. EDS analysis indicated that the α-phase dendrites in Ti-33Nb-5Ga were enriched with titanium, while the β-phase was richer in niobium and gallium elements. Mechanical properties were measured using nanoindentation and microhardness methods, where the Young's modulus for Ti-33Nb-3Ga and Ti-33Nb-5Ga was found to be 75.4 ± 2.4 and 67.2 ± 1.6 GPa, respectively, a significant reduction of 37% and 44% with respect to Ti-6Al-4V. This reduction helps address the disproportionate Young's modulus between titanium implant components and cortical bone. Importantly, both alloys successfully achieved superior antimicrobial properties against Gram-negative P. aeruginosa and Gram-positive S. aureus bacteria. Antibacterial efficacy was noted at up to 90 ± 5% for the 3 wt% alloy and 95 ± 3% for the 5 wt% alloy. These findings signify a substantial enhancement of the antimicrobial performance when compared to Ti-6Al-4V which exhibited very small rates (up to 6.3 ± 1.5%). No cytotoxicity was observed in hGF cell lines over 24 h. Cell morphology and cytoskeleton distribution appeared to depict typical morphology with a prominent nucleus, elongated fibroblastic spindle-shaped morphology, and F-actin filamentous stress fibres in a well-defined structure of parallel bundles along the cellular axis. The developed alloys in this work have shown very promising results and are suggested to be further examined towards the use of orthopaedic implant components.

Fabrication of High Strength, Antibacterial and Biocompatible Ti-5Mo-5Ag Alloy for Medical and Surgical Implant Applications.

In Situ Alloying Ti–Ag Antibacterial Biomaterials Via Laser Powder Bed Fusion: Microstructure, Mechanical Properties and Bioperformance

Design and preparation of a biomedical titanium alloy with low elastic modulus and high antibacterial property based on Ti-Mo-Ag system

Design of a new Ti-Mo-Cu alloy with excellent mechanical and antibacterial properties as implant materials

Tailorable Copper-Bearing Titanium Alloys with Remarkable Strength and Ductility Fabricated by Spark Plasma Sintering for Biomedical Applications

A Strong, Wear- and Corrosion-Resistant, and Antibacterial Co–30 At.% Cr–5 At.% Ag Ternary Alloy for Medical Implants

Simultaneous improvement in mechanical properties, corrosion resistance and antibacterial properties of Ti-Ag sintered alloy with gradient nanostructure

Alloy Design and Fabrication of Duplex Titanium-Based Alloys by Spark Plasma Sintering for Biomedical Implant Applications

Additive Manufacturing of Anti-Bacterial and Low-Cost Ti–Mo(–Ag) Alloys Using Elemental Powders Through in Situ Laser Alloying

Fabrication and evaluation of silver modified micro/nano structured titanium implant

Effect of the Synergistic Interaction of Micro- and Nanostructures with Silver Ions on the Biocompatibility and Antimicrobial Properties of Ti-15Mo-2.5Ag

A promising of alloying modified beta-type Titanium-Niobium implant for biomedical applications: Microstructural characteristics, in vitro biocompatibility and antibacterial performance

Development of Novel Antibacterial Ti-Nb-Ga Alloys with Low Stiffness for Medical Implant Applications

Antibacterial Ti-Cu Alloy With Enhanced Mechanical Properties As Implant Applications

Preparation and characterization of metastable β-type titanium alloys with favorable properties for orthopedic applications

A high strength, wear and corrosion-resistant, antibacterial and biocompatible Nb-5 at.% Ag alloy for dental and orthopedic implants

Characteristics of novel Ti–10Mo-xCu alloy by powder metallurgy for potential biomedical implant applications

Two novel titanium alloys for medical applications: Thermo-mechanical treatment, mechanical properties, and fracture analysis

Microstructure and Corrosion Resistance of Powder Metallurgical Ti-Nb-Zr-Mg Alloys with Low Modulus for Biomedical Application

Achieving low elastic modulus, excellent work hardening and high corrosion resistance in Ti-6Al-4V-5.6Cu alloy

An overview of surface modification, A way toward fabrication of nascent biomedical Ti–6Al–4V alloys