Abstract:Electrochemical conversion of CO2 to the syngas hybrid with the Fischer–Tropsch (FT) process is a promising way to produce synthetic fuels from renewable energy sources. The product distribution in liquid hydrocarbons produced by FT synthesis has strong dependence on the CO/H2 ratio of the syngas feedstock. Herein, we demonstrated the feasibility of tuning the CO/H2 ratio at a wide range by developing nanoparticle-assisted Ni–Co binary single-atom catalysts for electrocatalytic production of syngas. By controlling the elemental proportion of Ni–Co in the composite catalysts, electrochemical reduction of CO2 to syngas with a tunable CO/H2 ratio from 0.3 to 27.6 was achieved. For the binary catalysts with a Ni–Co ratio of 1:1, the CO/H2 ratio maintains at 1.3–1.5 in a broad potential range from −0.59 to −0.83 V versus reversible hydrogen electrode (RHE) and the total current density reaches ∼32.2 mA/cm2 at −1.0 V versus RHE. The promotion effect of nanoparticles on Ni–Co single-atom catalysts was validated by partial removal of nanoparticles and further density functional theory (DFT) calculations. As revealed by DFT calculations, nanoparticles incorporated in single-atom sites take essential roles in facilitating the adsorption of CO2 and the formation of *COOH. The origin of CO2RR and hydrogen evolution reaction reactivities can be identified as Ni–N4 and Co–N4 single-atom sites, respectively. The dual active sites allow the facile control of the CO/H2 ratio of electrochemical converted syngas, and it will be beneficial to downstream production of diverse chemicals.

Bi/Zn Dual Single‐Atom Catalysts for Electroreduction of CO2 to Syngas

Bi/Zn Dual Single‐Atom Catalysts for Electroreduction of CO 2 to Syngas

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single-Atom Catalysts.

Synthesis of Composition-Tunable Syngas from Efficiently Electrochemical Conversion of CO2 over AuCu/CNT Bimetallic Catalyst

Electrochemical Conversion of CO<sub>2</sub> to Syngas with Controllable CO/H<sub>2</sub> Ratios over Co and Ni Single-Atom Catalysts

AgZn-BDC-derived Catalyst for CO2 Electroreduction to Syngas with Fixed Ratio over Wide Current Density

Electrochemical Conversion of CO <sub>2</sub> to Syngas with Controllable CO/H <sub>2</sub> Ratios over Co and Ni Single‐Atom Catalysts

Hierarchical Dual Single-Atom Catalysts with Coupled CoN4 and NiN4 Moieties for Industrial-Level CO2 Electroreduction to Syngas.

Nanoparticle-Assisted Ni–Co Binary Single-Atom Catalysts Supported on Carbon Nanotubes for Efficient Electroreduction of CO2 to Syngas with Controllable CO/H2 Ratios

Nanoparticle-Assisted Ni–Co Binary Single-Atom Catalysts Supported on Carbon Nanotubes for Efficient Electroreduction of CO 2 to Syngas with Controllable CO/H 2 Ratios

Highly Efficient CO 2 Electroreduction on ZnN 4 -based Single-Atom Catalyst.

Synergistic Electrocatalytic Syngas Production from Carbon Dioxide by Bi‐Metallic Atomically Dispersed Catalysts

Hierarchical Dual Single-Atom Catalysts with Coupled CoN 4 and NiN 4 Moieties for Industrial-Level CO 2 Electroreduction to Syngas

Electrochemical Reduction of CO2 into Tunable Syngas Production by Regulating the Crystal Facets of Earth-Abundant Zn Catalyst.

Fabricating penta-coordinated Fe single atom for electrochemical CO2 reduction to syngas

Single-atom Catalysts with Bimetallic Centers for High-Performance Electrochemical CO2 Reduction

Design of Mg-Ni binary single-atom catalysts for conversion of carbon dioxide to syngas with a wide tunable ratio: Each species doing its own job or working together to win?

Active Sites of Zn Catalysts for CO2 Electroreduction to CO

Dual active sites-dependent syngas proportions from aqueous CO2 electroreduction

Flexible control of Co/Zn–nitrogen coordination in ZIFs for electrochemical CO2 reduction to tunable syngas

Promoting CO2 Electroreduction Kinetics on Atomically Dispersed Monovalent Zn(I) Sites by Rationally Engineering Proton‐feeding Centers