Abstract:The water-drop shaped fairings with varying shape angles are attached to a circular cylinder to achieve wake control and vortex suppression at critical Reynolds numbers. To ensure the capability of Reynolds averaged Navier-Stokes (RANS), detached eddy simulation (DES) and large eddy simulation (LES) models at the critical Reynolds number region, three representative turbulence models are employed: LES with subgrid-scale (SGS) model, delayed DES model with improved wall-modeling capability (IDDES) and shear stress transport (SST) k- RANS - RANS model. These models are utilized to simulate flow around a circular cylinder at Reynolds number Re = 2.5 . 5 x 105. 5 . The solver used in this paper is further developed based on the high-resolution algorithm platform for incompressible flow (HRAPIF). The comparative analysis of the results from the three turbulence models has been rigorously validated and investigated. An exhaustive examination of the mean flow field, Reynolds stresses, characteristic lengths, and instantaneous flow fields among the models reveals instructive insights. The IDDES and -LES models predict the hydrodynamic forces, the so-called 'drag crisis', alongside the pressure distribution and skin friction coefficient with high precision. The -LES model stands out for its superior accuracy, while the IDDES model is also a viable alternative, offering commendable accuracy with a reduced demand for mesh density. Subsequently, the IDDES model is selected for wake control calculations using fairings with five distinct shape angles ( 30 degrees , 45 degrees , 60 degrees, degrees , 75 degrees degrees and 90 degrees) degrees ) at Re = 2.5x . 5x 105. 5 . In-depth comparisons to the bare cylinder and subcritical results reveal that the wake control effect varies at the critical Reynolds region. The fairing with a 30 degrees degrees shape angle substantially suppresses hydrodynamic forces. The lift coefficient experiences a remarkable decrease of approximately 96%, while the drag coefficient diminishes by about 90%. Concurrently, fairings with angles from 45 degrees degrees to 90 degrees degrees lead to reductions in drag coefficient of 11.6%, 10%, 3% and 4%, respectively. A 75% lowering in the lift force coefficient is found even with a short fairing with shape angle = 90 degrees, degrees , which maybe a meaningful instruction to industrial design.

Laminar Wake Suppression of Airfoil by Rotating Rod at Low Reynolds Number

Experimental and Numerical Studies on Aerodynamic Control of NACA 4418 Airfoil with a Rotating Cylinder

Wake suppression of a cylinder immersed in turbulence using rotating rods

Turbulent wake suppression of circular cylinder flow by two small counter-rotating rods

Effects of Micro Blowing/suction Flow Control Devices on a NACA0015 Airfoil

Wake dynamics of low-Reynolds-number flow around a two-dimensional airfoil

Dynamic Stall Control on a Vertical Axis Wind Turbine Aerofoil Using Leading-Edge Rod

Effects of Leading-Edge Rod on Dynamic Stall Performance of a Wind Turbine Airfoil

Dynamic Mode Decomposition Analysis of Flow Separation Control on Wind Turbine Airfoil Using Leading−edge Rod

Experimental investigation on the optimal control of vortex shedding of a circular cylinder with rotating rods at moderate Reynolds numbers

Control of vortex shedding and acoustic resonance of a circular cylinder in cross-flow

Numerical Simulations of the Flow Dynamics Past an Oscillating Rod-Airfoil Configuration

Detached-eddy Simulation of Flow Past a Pitching NACA 0015 Airfoil with Pulsed Actuation

Active control of the flow past a circular cylinder using online dynamic mode decomposition

Modification of subcritical cylinder flow with an upstream rod

Low-Reynolds-number aerodynamic characteristics of airfoils with piezocomposite trailing control surfaces

A zero-net-mass-flux wake stabilization method for blunt bodies via global linear instability

Turbulence Model Adaptability at Critical Reynolds Numbers and Applications in Wake Control Via Fairings

Effects of a Pair of Adjacent Rods on Circular Cylinder Flow

Quantitative Study on the Flow Control of a 1:2 Rectangular Cylinder Based on the Leading-Edge Suction

Enhancement of aerodynamic performance of a heaving airfoil using synthetic-jet based active flow control