Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Numerical Study on Liquid-Return Characteristics in the Accumulator of the R290 Rotary Compressor

Numerical investigation on vapor-liquid two-phase compression in the cylinder of rotary compressors

Experimental Investigations on A R134a Ejector Applied in A Refrigeration System

Theoretical Study on A Novel R32 Refrigeration Cycle with A Two-Stage Suction Ejector

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Simulation on two-phase refrigerant compression in the cylinder of rotary compressors using CFD method

Experimental Analysis on R290 Solubility and R290/oil Mixture Viscosity in Oil Sump of the Rotary Compressor

Experimental Study on Startup Characteristics of R290 Air Conditioner with Low Lubricant Charge

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Refrigerant migration and oil sump viscosity change of R290 high-pressure rotary compressor during shutdown process

Performance and Refrigerant Mass Distribution of a R290 Split Air Conditioner with Different Lubricating Oils

Performance Research and Improvement of Ultra-High-speed R290 Rotary Compressor

Experimental Study on the Oil Return Characteristics of Miscible or Partially Miscible Oil in R290 Room Air Conditioners

Experimental Investigation of Dynamic Characteristics of A Rotary Compressor and Its Air Conditioner Using R290 During Warm Startup

A Study On A New Auto-Cascade Refrigerating Cycle

Experimental and numerical analysis of the performance of the R290 rotary compressor used in a split-room air conditioner at high ambient temperature

Start-up Characteristics of a R290 Rotary Compressor for an Air Source Heat Pump under Low Ambient Temperature Condition

150USRT Class R-513A Refrigerant Two-Stage Centrifugal Compressor Design Point and Separation Point Flow Field Simulation Analysis

Experimental study of the lubricant-refrigerant flow in a rotary compressor

The Performance Analysis of R32 Rotary Compressor Used for Room Air Conditioners