Abstract:A multi-objective optimization method of heat exchanger network (HEN) on the basis of partition of minimum approach temperature (Delta T-min) intervals is proposed to minimize the total annual cost and accumulated CO2 emissions in construction and operation phases. In this method, both dominant and recessive CO2 emissions are considered, and the effects of Delta T-min on multi-objective optimization problems of HEN are investigated. We find that a multi-objective optimization problem may reduce to a single objective optimization problem as Delta T-min changes. The critical Delta T-min that distinguishes the intervals for the single objective optimization and the multi-objective optimization problem can be identified by combining the pinch analysis and mathematical programming method. The optimal structure and CO2 emissions of HEN are obtained in the single objective optimization problem, whereas the Pareto front of two objectives and a trade-off strategy are obtained in the multi-objective optimization problem. The HEN in a vacuum gas oil hydro-treating unit in a refinery is taken as a case study. Results indicate that the partition of Delta T-min intervals helps to identify the nature of the multi-objective optimization problems and reduce the computation loads of the multi-objective optimization problem of HENs. In addition, the optimal solutions of HEN obtained by the epsilon-constraint method distribute uniformly, and the dominant objective changes gently within the intervals of Delta T-min for the multi-objective optimization. (C) 2015 Elsevier Ltd. All rights reserved.

Optimal design of heat exchanger network considering the fouling throughout the operating cycle

Efficient Strategy for the Synthesis of Work and Heat Exchange Networks

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Synthesis of Flexible Heat Exchanger Network with Fouling Growth

Simultaneous Optimization of Synthesis and Scheduling of Cleaning in Flexible Heat Exchanger Networks

Economic and System Reliability Optimization of Heat Exchanger Networks Using NSGA-II Algorithm

Optimization-Based Framework for Designing Dynamic Flexible Heat Exchanger Networks

Optimal Design Approach for the Plate-Fin Heat Exchangers Using Neural Networks Cooperated with Genetic Algorithms

Retrofit of heat exchanging network considering pressure drop based on GA/SA

Simultaneous optimization of areas and cleaning schedule for heat exchanger networks

A simultaneous optimization of a flexible heat exchanger network under uncertain conditions

Synthesis of Heat Exchanger Networks Considering Fouling, Aging, and Cleaning

Simultaneous Optimization Strategies for Heat Exchanger Network Synthesis and Detailed Shell-and-tube Heat-Exchanger Design Involving Phase Changes Using GA/SA

Optimization-based framework for the synthesis of heat exchanger networks incorporating controllability

Fouling Mitigation in Heat Exchanger Network Through Process Optimization

Optimization of compact heat exchangers by a genetic algorithm

Multi-objective Optimization of Heat Exchanger Networks Based on Analysis of Minimum Temperature Difference and Accumulated CO2 Emissions

A Hybrid Algorithm Framework for Heat Exchanger Networks Synthesis Considering the Optimal Locations of Multiple Utilities

A new methodology for simultaneous optimization of capital and operating cost targets in heat exchanger network design

Fouling Potential Prediction and Multi-Objective Optimization of a Flue Gas Heat Exchanger Using Neural Networks and Genetic Algorithms

Optimization of compact heat exchanger based on 3D distributed-parameter model