Abstract:Reducing the membrane surface negative charge density and properly enlarging the pore size could benefit the selective and efficient separation of divalent cations from monovalent cations desired by many applications (e.g., Li+/Mg2+ separation) using nanofiltration (NF) by synergistically exploiting the Donnan and steric effects. This study provides a one-step tactic for the preparation of such membranes by simply introducing a small percentage of sulfuryl chloride (SO2Cl2) into the organic phase of trimesoyl chloride (TMC). This method is adaptable to the classical interfacial polymerization (IP) technique. The key conditions include a sufficient high concentration of piperazine (PIP) in the aqueous phase (e.g., 2.0 wt %) and a low-to-medium concentration ratio of sulfuryl chloride to TMC. An as-prepared membrane, which manifested a high Li+/Mg2+ selectivity of 22.2, exhibited a high rejection of MgCl2 at 92%, a low rejection of Na2SO4 at 34%, and a relatively high water permeance of 11.1 L m(-2) h(-1) bar(-1). We propose that the sulfuryl chloride monomers mainly played an interferential role rather than largely being incorporated into the polyamide matrix. This was demonstrated by the very low sulfur element composition in the active layer and the substantially enlarged membrane pore size in comparison to that of the control membrane. Adding sulfuryl chloride into the organic phase could allow more PIP monomers to diffuse through the enlarged structure to the superficial surface of the membrane, leaving more unreacted amine groups endowed with positive charges. Moreover, the addition of sulfuryl chloride could greatly change the membrane surface and structural morphologies, and in turn the surface roughness, by increasing the number of large ring-like structures and/or rougher nodules that could cover almost the entire membrane surface. Therefore, this work demonstrated that the membranes fabricated by the novel approach could have practical applications for cation separation.

Solvation‐amination‐synergy That Neutralizes Interfacially Polymerized Membranes for Ultrahigh Selective Nanofiltration

Tailoring the Selectivity of Quasi-Pims Nanofiltration Membrane Via Molecular Flexibility of Acyl Chloride Monomers for Desalination from Dye Effluents

Ionic Hyperbranched Poly(amido-amine)-Incorporated Nanofiltration Membranes for High-Efficiency Dye Desalination

Alginate Hydrogel Assisted Controllable Interfacial Polymerization for High-Performance Nanofiltration Membranes

Tailoring the microstructure of zwitterionic nanofiltration membranes via post-treatment for antibiotic desalination

Enhancing the perm-selectivity of thin-film nanocomposite membranes intercalated with cyclodextrin-chelated Metal-Organic Framework via modulated interfacial polymerization

Polar Solvent-Induced Spontaneous Nanofoaming for Synthesizing Ultra-High-Performance Polyamide Nanofiltration Membranes

Scalable nanofiltration membranes with sharpened pore distribution and enhanced negativity for mono/divalent anion separation

Development of Omniphobic Desalination Membranes Using a Charged Electrospun Nanofiber Scaffold

Charge‐Sign‐Independent Separation of Mono‐ and Divalent Ions With Nanofiltration Membranes

Simultaneously Modulating Nanofiltration Membrane Surface Charges and Pore Size in Pursuit of Effective Cation Separation Via a Bi-Functional Monomers-Interfered IP Reaction

Surfactant-assisted interfacial polymerization for improving the performance of nanofiltration-like forward osmosis membranes

High-performance Nanofiltration Membranes with a Polyamide-Polyester Composite Layer and a Polydopamine Surface Layer for Desalination and Dye Pollutant Removal

Molecular Design of the Polyamide Layer Structure of Nanofiltration Membranes by Sacrificing Hydrolyzable Groups Toward Enhanced Separation Performance.

Demystifying viscous isoalkanes as the organic solvent in interfacial polymerization for manufacturing desalination membranes

Solvent-free fabrication of pore-filling cation-exchange membranes for highly efficient desalination

A Selective Separation Mechanism for Mono/divalent Cations and Properties of a Hollow-Fiber Composite Nanofiltration Membrane Having a Positively Charged Surface

Development of antifouling nanofiltration membrane with zwitterionic functionalized monomer for efficient dye/salt selective separation

Dual‐layer Membrane with Hierarchical Hydrophobicity and Transport Channels for Nonpolar Organic Solvent Nanofiltration

PolyMOF Interlayers Modulated Interfacial Polymerization of Ultra-thin Nanofiltration Membranes with Efficient and Stable Desalination Performance

Fabrication of polyamide/zwitterion functionalized mesoporous silica nanofiltration membrane with highly enhanced antifouling performance