Abstract:The utilization of powdery semi-coke as a power fuel in pulverized coal-fired power plants has become a new and potential technique to consume the excess powdery semi-coke. The characteristic of low volatile results in poor combustion performance and high NOx emission, and to co-fire with bituminous coal is a practical strategy to address this problem. However, the co-combustion characteristics and the inherent interaction between semi-coke and coal remain insufficiently understood. In addition, the influences of secondary air arrangement, the boiler operation load, and the fuel type on co-combustion process are still unclear, which is urgent to be further explored. In the present study, experiments and numerical simulations were jointly utilized to inquire into the co-combustion behaviors and NOx emission features of semi-coke and coal. The results demonstrated that the “out-furnace method” was a suitable choice for small-capacity boiler when the proportion of semi-coke was 33%, due to the limited combinations of the semi-coke injection position. It was recommended that semi-coke was preferred to be injected from the middle layers of the furnace under the “in-furnace method” to improve the overall co-combustion performance. The critical value of the separated over fire air ratio in this study was 27.5%, over which a slight drop of carbon content in fly ash could come about. Moreover, the elevation in the proportion of separated over fire air gave rise to the significant decline of NOx concentration. The constricted secondary air arrangement was preferred to be employed due to the high boiler efficiency. The separated over fire air and the surrounding air needed to maintain a wide-open degree to prevent the increase of NOx emissions and the coking of nozzles. For the load reduction regulation method adopted in this study, the NOx concentration first rose and then dropped, while the burnout ratio decreased obviously as the operation load was reduced. Different combinations of coal and semi-coke generated significant influences on co-combustion behaviors within the furnace. The NOx generated by high-volatile fuel (bituminous coal) combustion was mainly affected by volatile-N, while the NOx generated by low-volatile fuel (semi-coke) was mainly impacted by char-N. This study is of guiding significance for the efficient and clean utilization and beneficial to the large-scale application of powder semi-coke in power plants.

Effects of Particle Size on Semicoke and High-Volatile Bituminous Coal Cofiring in Reducing-to-oxidizing Environment

Effects of Primary Air Velocity on Co-Combustion Characteristics of Bituminous Coal and Semicoke under Reducing-to-oxidizing Environment

Influence of Nozzle Height to Width Ratio on Ignition and NO X Emission Characteristics of Semicoke/bituminous Coal Blends in a 300 Kw Pulverized Coal-Fired Furnace

Determining the Optimum Fuel Concentration for Ignition and Combustion of Semi-Coke and Bituminous Coal Blends with Rich/lean Burner

TG-FTIR study on co-combustion of bituminous coal semicoke and lignite

Experimental investigation on combustion and NO formation characteristics of semi-coke and bituminous coal blends

Numerical Analysis on Effect of Blend Ratio on Co-Combustion Characteristics of Semi-Coke and Bituminous Coal in Swirl Burner

Experimental Investigation on Combustion Characteristics and Kinetics During Co-Firing Bituminous Coal with Ultra-Low Volatile Carbon-Based Solid Fuels

Experimental investigation on ignition and burnout characteristics of semi-coke and bituminous coal blends

Experiments and Simulation on Co-Combustion of Semicoke and Coal in a Full-Scale Tangentially Fired Utility Boiler

Non-isothermal Thermogravimetric Investigation on Mutual Effect Between Bituminite and Anthracite in Blends for Blast Furnace Injection

Experimental and Numerical Study on Co-combustion Behaviors and NOx Emission Characteristics of Semi-coke and Coal in a Tangentially Fired Utility Boiler

Investigation on co-combustion of semi-coke and bituminous coal in oxygen-enriched atmosphere: Combustion, thermal conversion, and kinetic analyses

Co-combustion kinetics characteristics of semi-coke and bituminous coal under a drop tube furnace

Effects of Blending Ratio on Combustion and NO Emission Characteristics During Co-Firing of Semi-Char and Lignite in a 350 Kw Pulverized Coal-Fired Furnace

Investigation on Co-Gasification Characteristics of Semicoke and Bituminous Coal in a CO2 Atmosphere at High Temperatures

Investigation of Air-Mild and Oxy-Mild Combustion Characteristics of Semicoke and Bituminous Coal Mixtures in a 0.3 MW Fuel-Rich/lean Fired Furnace

Computational fluid dynamics investigation on the effect of co-firing semi-coke and bituminous coal in a 300MW tangentially fired boiler

Experimental Evaluation on Co-Combustion Characteristics of Semi-Coke and Coal under Enhanced High-Temperature and Strong-Reducing Atmosphere

Enhanced Combustion of Bituminous Coal and Semicoke Mixture by Ferric Oxide with Thermographic and Kinetic Analyses

Experimental study on the combustion and NOx emission characteristics of a bituminous coal blended with semi-coke