Abstract:The automobile industry relies primarily on spot welding operations, particularly resistance spot welding (RSW). The performance and durability of the resistance spot-welded joints are significantly impacted by the welding quality outputs, such as the shear force, nugget diameter, failure mode, and the hardness of the welded joints. In light of this, the present study sought to determine how the aforementioned welding quality outputs of 0.5 and 1 mm thick austenitic stainless steel AISI 304 were affected by RSW parameters, such as welding current, welding time, pressure, holding time, squeezing time, and pulse welding. In order to guarantee precise evaluation and experimental analysis, it is essential that they are supported by a numerical model using an intelligent model. The primary objective of this research is to develop and enhance an intelligent model employing artificial neural network (ANN) models. This model aims to provide deeper knowledge of how the RSW parameters affect the quality of optimum joint behavior. The proposed neural network (NN) models were executed using different ANN structures with various training and transfer functions based on the feedforward backpropagation approach to find the optimal model. The performance of the ANN models was evaluated in accordance with validation metrics, like the mean squared error (MSE) and correlation coefficient (R2). Assessing the experimental findings revealed the maximum shear force and nugget diameter emerged to be 8.6 kN and 5.4 mm for the case of 1-1 mm, 3.298 kN and 4.1 mm for the case of 0.5-0.5 mm, and 4.031 kN and 4.9 mm for the case of 0.5-1 mm. Based on the results of the Pareto charts generated by the Minitab program, the most important parameter for the 1-1 mm case was the welding current; for the 0.5-0.5 mm case, it was pulse welding; and for the 0.5-1 mm case, it was holding time. When looking at the hardness results, it is clear that the nugget zone is much higher than the heat-affected zone (HZ) and base metal (BM) in all three cases. The ANN models showed that the one-output shear force model gave the best prediction, relating to the highest R and the lowest MSE compared to the one-output nugget diameter model and two-output structure. However, the Levenberg-Marquardt backpropagation (Trainlm) training function with the log sigmoid transfer function recorded the best prediction results of both ANN structures.

Relationship Between Dynamic Resistance and Welding Quality During Resistance Spot Welding for Micron AuNi9 Wire

Ultrafast Parallel Micro-Gap Resistance Welding of an AuNi9 Microwire and Au Microlayer

Studies of dynamic resistance in resistance spot welding

On-line inspection of weld quality based on dynamic resistance curve in resistance spot welding and weldbonding

Thermo-mechanical Modelling of Cu Wire Parallel Gap Micro-resistance Welding Process

Transient solid-liquid interfacial reaction between Al wire and Au/Cu pad during parallel gap micro-resistance welding

Assessing Electrode Characteristics in Continuous Resistance Spot Welding of BH 340 Steel Based on Dynamic Resistance

Interconnection of Cu wire/Au plating pads using parallel gap resistance microwelding process

Orthogonal Optimization of Resistance Spot Welding Parameters and Microstructure and Mechanical Property of Aluminum Alloy/High Strength Steel Joint

Multi-objective optimization of mechanical quality and stability during micro resistance spot welding

Feasibility study of resistance spot welding of dissimilar Al/Mg combinations with Ni based interlayers

Resistance spot welding of ultra-thin automotive steel

Dynamic resistance signal–based wear monitoring of resistance spot welding electrodes

RESISTANCE SPOT WELDING OF DISSIMILAR METALS AISI 1006 LOW CARBON STEEL AND AA6061 ALUMINUM ALLOY USING ZINC AND TIN COATING

Effect of variable electrode force on weld quality in resistance spot welding

Microstructure and Mechanical Properties of Resistance Spot Welds for Fe-based Metallic Glass

Online monitoring of resistance spot welding electrode wear state based on dynamic resistance

Artificial Neural Networks and Experimental Analysis of the Resistance Spot Welding Parameters Effect on the Welded Joint Quality of AISI 304

Study on the Thermo-Effect of Nugget Growing in Single-Phase AC Resistance Spot Welding Based on the Calculation of Dynamic Resistance

Resistance spot welding of high-strength DP steel and nano/ultrafine-grained IF steel sheets

A Novel Real-Time Measurement Method for Dynamic Resistance Signal in Medium-Frequency DC Resistance Spot Welding