High-Temperature Plasticity Enhanced by Multiple Secondary Phases in a High-Si Austenitic Stainless Steel

Chen Sihan,Liang Tian,Ma Guangcai,Zheng Chengwu,Chen Deli,Ma Yingche,Liu Kui

DOI: https://doi.org/10.1007/s40195-022-01388-5

2022-01-01

Acta Metallurgica Sinica (English Letters)

Abstract:An austenitic stainless steel with 6 wt% Si and multiple secondary phases was produced with the aim to achieve enhanced plasticity during hot deformation. The microstructure of the steel after fracture was characterized via electron back-scattered diffraction, transmission Kikuchi diffraction and scanning transmission electron microscopy. From the tail of the gage to the necking region, the microstructure of the material evolved from low-angle grain boundaries (LAGBs) to mixtures of LAGBs and high-angle grain boundaries (HAGBs), and fine equiaxed recrystallized grains. The elongation to failure in the tensile test exceeds 167%. During the hot deformation, continuous dynamic recrystallization of the austenitic matrix was promoted by the multiple secondary phases. The dislocations introduced by the secondary phases were rearranged and continuously transformed into HAGBs. The initially coarse grains (30.5 μm) were refined into ultra-fine equiaxed grains (1 μm), which contributed significantly the enhanced plasticity during hot deformation of the steel. In the necking area of the sample, twins were nucleated in the stress concentration regions and accommodated the local strain by discontinuous dynamic recrystallization, which was also beneficial to improving the plasticity.