Experimental Investigation of Failure Process and Characteristics in Circular Tunnels under Different Stress States and Internal Unloading Conditions

Xuefeng Si,Xibing Li,Fengqiang Gong,Linqi Huang,Xiling Liu

DOI: https://doi.org/10.1016/j.ijrmms.2022.105116

IF: 6.849

2022-01-01

International Journal of Rock Mechanics and Mining Sciences

Abstract:In this study, we investigated the failure process and evolution mechanisms in circular tunnels under a complex stress path of deep in-situ stress + excavation unloading + stress adjustment using a simulation test based on loading first and then drilling (LFTD) mode. This test was performed on cubic sandstone specimens using a true-triaxial testing system combined with a self-developed drilling unloading test device. For comparison, another set of sandstone specimens, similar to the original specimens but with phi 25 mm circular through-holes, were pro-cessed to perform another set of simulation tests based on drilling first and then loading (DFTL) mode. Under constant lateral stress, compared with the DFTL test, the initial failure vertical stress was lower, and the sur-rounding rock was more prone to failure in the LFTD test, indicating that drilling unloading causes damage to the surrounding rock, thereby inducing a strength-weakening effect. Under constant lateral and vertical stresses, sidewall failure in the LFTD test was more severe. The sidewall's initial failure vertical stress difference between the LFTD and DFTL tests increases with increasing lateral stress or initial hydrostatic pressure. The effect of drilling unloading becomes more apparent under a higher initial stress state. Comparing the same types of simulation tests under different stress states, the initial failure vertical stress increases with the lateral stress or initial hydrostatic pressure, inducing a strength-strengthening effect in the surrounding rock. Comparing the strength-strengthening effect caused by increasing the lateral pressure or initial hydrostatic pressure and the strength-weakening effect caused by drilling unloading shows that the strength-strengthening effect is more evident.