Abstract:<p>To study the toppling deformed body before construction of the dam at the Gushui hydropower station, we developed here a physical model of the slope on the basis of known local geology and of similarity theory. We simulated valley trenching by a method using prior produced block modules and three levels of excavation, and we studied key hazard factors of deep toppling deformation and the disaster pattern related to anti-dip, layered-rock slope under gravity by a five-stage centrifuge-model test and Universal Distinct Element Code numerical-simulation analysis. The results show the following: (1) The occurrence, development and destruction of deep toppling deformation of anti-dip layered rock slopes must have gone through a long geological history; the accumulation of energy and deformation is a very long process, and accelerated-deformation is closely related to changes in external conditions (such as excavation, earthquake, etc.); (2) lithologic conditions (relatively weak rock mass), structural conditions (appropriate layer thickness and dip angle), and external conditions (valley trenching or excavation of slopes) are key factors for deep toppling deformation, while the free-surface condition is the key hazard factor; (3) deep toppling deformation can lead to multilevel bending zones at different depths inside the slope after the several stages of valley trenching (multilevel excavation); the bending zone is gradually connected from the foot of the slope all the way to the top, which eventually becomes the failure boundary; and the development and connection of the bending zone may result in the overall shear failure of the slope along the bending zone; (4) for deep toppling deformation, we propose a qualitative-judgment index and quantitative-judgment indicators of the degree of toppling deformation. We derived quantitative-judgment formulas for the degree of toppling deformation and the calculation formulas were used for the maximum depth of toppling deformation, and we established a system for discrimination of destruction patterns for deep toppling deformation of anti-dip slope.</p>

Centrifuge Model Test on Anti-dip Rock Slopes with Unequal Thicknesses Subjected to Flexural Toppling Failure

Study on the anti-dip layered rock slope toppling failure based on centrifuge model test

Investigation of the block toppling evolution of a layered model slope by centrifuge test and discrete element modeling

Centrifuge Model Tests on Excavation-Induced Failure of Slopes

Centrifuge Modeling of Rock Slopes Susceptible to Block Toppling

Centrifuge Model Test on Excavation-Induced Failure of Soil Slopes Overlying Bedrock

Centrifuge Model Test Study of Structuralized Cemented Slopes under Excavation Conditions

Centrifuge modeling of failure behavior of pile-reinforced slope

Centrifuge Model Test Study on Failure Behavior of Soil Slopes Overlying the Bedrock

Exploring failure evolution of anti-dip slate slope using centrifuge test and discrete element method

Centrifuge Model Tests on Pile-Reinforced Slopes Subjected to Drawdown

Flexural toppling characteristics of anti-dip soft rock slope with base friction test

Effects of Extreme Drought-Rainfall on Slope Failure Mechanisms: Centrifuge Modelling

Failure Mechanism and Stabilization of a Basalt Rock Slide with Weak Layers

Centrifuge Modeling Of Progressive Failure Of Soil Slope

Centrifuge-model test study of key hazard factors of deep toppling deformation and disaster pattern of anti-dip layered-rock slope under gravity

Centrifugal Model Test On Behavior Of Strip Footing On Soil Nail-Reinforced Cohesive Soil Slopes

Centrifuge Modeling of Rainfall-Induced Deformation of Slopes with Weak Layers

Centrifuge model test on failure of soil slope under drawdown of water level

Discrete element-based numerical simulation and failure mechanism analysis of anti-dip rock slopes

Centrifuge Modeling of the Progressive Failure of A Soil Slope under Cyclic Loading Conditions