Abstract:Silicon has been extensively studied as an anode material in lithium-ion batteries due to its extremely high theoretical specific capacity of 3578 mAh/g (assuming Li 15 Si 4 as intermediate product). However, silicon undergoes huge volume variations during repeated discharge and charge, leading to poor electrode mechanical integrity, continual electrolyte decomposition and fast capacity decay. Developing high strength binders in silicon anodes have been considered as an efficient pathway to alleviate various capacity decay pathways. Currently, lithiated poly acrylic acid (LiPAA) is mostly used as the binder for silicon electrodes due to its strong binding capability and (electro)chemical compatibility with Si and electrolyte. However, cracks at the electrode level can still be observed for the cycled electrodes, which suggests that a stronger binder is required to mitigate volume expansion of Si electrode and hold the particles together. Herein we study the polyimide (PI) materials as the binders for Si anode in an attempt to achieve stable cycling performance. With PI binder, the silicon electrode exhibits a higher tensile strength than that of conventional PAA binder. The strong adhesion of the PI binder suppresses the structural collapse of the Si negative electrode during lithiation/delithiation, enabling high capacity retention and stable cycle life. However, the PI crosslinking process requires high temperature and inert atmosphere, which is a challenge for its practical application. In this work, we explore various PI crosslinking conditions and their effects on electrochemical performance. This work offers us an alternative binder material with high tensile strength for the Si electrode. Acknowledgement We gratefully acknowledge the support from the U.S. Department of Energy's Vehicle Technologies Office. This work is conducted under the Cell Analysis, Modeling, and Prototyping (CAMP) Facility at Argonne National Laboratory. Argonne National Laboratory is operated for DOE office of Science by UChicago Argonne, LLC, under contract number DE-AC02-06CH11357.

Performance Improvement of Poly(acrylic Acid) Binder-Based Silicon/graphite Composite Anodes by Room Temperature Electron Beam Irradiation-Induced Crosslinking

Epoxy and Amide Crosslinked Polarity Enhanced Polysaccharides Binder for Silicon Anode in Lithium-Ion Batteries

Modified Polyacrylonitrile Cross-Linked with Carboxymethyl Cellulose Constructing a Hydrogen Bonding Network for High-Performance Silicon Anodes

Epoxy Cross-Linking Enhanced the Toughness of Polysaccharides As a Silicon Anode Binder for Lithium-Ion Batteries.

Polyacrylic acid and β-cyclodextrin polymer cross-linking binders to enhance capacity performance of silicon/carbon composite electrodes in lithium-ion batteries

Radical-Scavenging Activatable and Robust Polymeric Binder Based on Poly(acrylic acid) Cross-Linked with Tannic Acid for Silicon Anode of Lithium Storage System

A Physically Cross-Linked Hydrogen-Bonded Polymeric Composite Binder for High-Performance Silicon Anodes

Re‐Engineering Poly(Acrylic Acid) Binder toward Optimized Electrochemical Performance for Silicon Lithium‐Ion Batteries: Branching Architecture Leads to Balanced Properties of Polymeric Binders

Modulation of Ion-Conducting Groups in Aqueous Terpolymer Binders to Boost the Electrochemical Performance of Silicon-Based Anodes

A Four‐Armed Polyacrylic Acid Homopolymer Binder with Enhanced Performance for SiOx/Graphite Anode

Poly (acrylic Acid Sodium) Grafted Carboxymethyl Cellulose As a High Performance Polymer Binder for Silicon Anode in Lithium Ion Batteries

Evaluating Polyacrylic Acid as a Universal Aqueous Binder for Ni‐rich Cathodes NMC811 and Si Anodes in Full cell Lithium‐ion Batteries

Improving the Cycling Performance of Lithium-Ion Battery Si/Graphite Anodes Using a Soluble Polyimide Binder

High Adhesive Polyimide Binder for Silicon Anodes of Lithium Ion Batteries

Silk fibroin-based biopolymer composite binders with gradient binding energy and strong adhesion force for high-performance micro-sized silicon anodes

Enhancing performance of Si/C composite anode in high energy density lithium-ion batteries with CMC-CPAM-SBR binder

Improved performance in micron-sized silicon anodes by in situ polymerization of acrylic acid-based slurry

Multiple Network Binders via Dual Cross-Linking for Silicon Anodes of Lithium-Ion Batteries

Cross‐Linked Binary Polymeric Binder of Polyacrylic Acid–Carboxymethyl Cellulose for Improving Phosphorus Anode

Poly(acrylic acid) Grafted with a Boronic Ester and Dopamine as a Self-Healable and Highly Adhesive Aqueous Binder for Si Anodes

Binder effect on cycling performance of silicon/carbon composite anodes for lithium ion batteries