Abstract:This paper investigates experimentally the flame height and temperature profile of window ejected thermal plume from compartment fire without facade wall. The previous works and correlations on these characteristics of such thermal plume mainly concern the condition with a facade wall, where the air entrainment of the thermal plume from the side of the facade wall is restricted. However, such entrainment constraint effect does not exist when the fire occurs at the top floor of the building noting that there is no facade above the top floor, for which scenario the flame height and temperature profile of the thermal plume characteristics have not been quantified in the literature. In this work, comprehensive experiments were carried out by employing a reduced scale model (1:8), consisting of a 0.4 m cubic fire compartment with six different window openings corresponding to various ventilation factors (A root H). A propane square porous burner was set as fire source with various fuel mass flow meters and hence heat release rate. All the tests were designed as uN-ventilated condition that stable flame was observed outside the window. The flame height outside the window was recorded through a CCD camera from the side view. The temperature profiles of the ejected fire plume outside the window were measured by the thermocouple arrays (7 rows, 7 columns) located above the top of the compartment. These measured quantities without the facade wall were compared from those with a facade wall. Results showed that the flame height can be still well correlated non-dimensionally by the excess fuel heat release rate and the characteristic length scale (l(1) = A root H-2/5) of the window. However, the flame height with a facade wall was higher, being 1.31 times of those without a facade wall. This difference was physically quantified by the air entrainment change due to constraint effect from the facade wall. The radial temperature profile in the ejected thermal fire plume at various height can be globally represented by the Gaussian function (T-z.x-T-infinity/T-z.max-T-infinity = e([-beta(x-xm/FWHM)2])) with and without facade wall, where the value of beta was found to be 2 In 2. These quantifications and correlations on window-ejected thermal plume characteristics without a facade wall, providing a significant supplementary over previous works focusing on condition with the facade wall, will be an important addition for the estimation of such thermal plume characteristics and its thermal impacts. This work, providing experimental data and correlations on window ejected thermal plume characteristics from compartment fire at the top level of the building without the effect of facade wall, will be an important supplementary over previous knowledge focusing on the scenario with the effect of facade wall.

Fire Test of Metal Sandwich Plates During a Window Spill Fire

Effect of Width on the Fire Spreading Characteristics of PE Metal Sandwich Panels under the Action of Double Fire Sources

Spread Behavior of Spill Fire under Lateral Wind and Temperature Distribution of PE Sandwich Panels on Facade

Fire Spread Characteristics of Metal-Polyethylene Sandwich Panels

Experimental study on fire response of double glazed panels in curtain walls

Experimental Study on Flame Height and Temperature Profile of Buoyant Window Spill Plume from an Under-Ventilated Compartment Fire

Heat flux and flame spread rate of discrete PMMA in concave building facade with window intervals

Experimental and Theoretical Study on the Characteristics of the Spill Plume in a Compartment Fire with High-Low Opposing Openings

Experimental Study on the Heat Flux Profile Upon the Building Facade of the Window-Ejected Fire Plume

Numerical Study on Fire Response of Glass Facades in Different Installation Forms

Experimental Study on Fallout Behaviour of Tempered Glass Façades with Different Frame Insulation Conditions in an Enclosure Fire

Flame Height and Temperature Profile of Window Ejected Thermal Plume from Compartment Fire Without Facade Wall

Effect of Spacing on the Flame Propagation Characteristics of PE/Metal Sandwich Insulation Panels

Experimental Study on the Breakage of Toughened Glass in Enclosure Fires

Experimental Investigation of the Post-Fire Impact Resistance and Energy-Absorbing Characteristics of Polyethylene Cored Lightweight Metal Sandwich Panels

Impact of Sliding Window Opening Sizes and Crosswinds on Combustion Characteristics of Polyethylene Sandwich Panels in External Venting Façade Fires

Experimental Study on Vertical Temperature of Facade Fire Plume Ejected from Compartment Constrained by Adjacent Single Sidewall

Thermal Performance of Exposed Framing Glass Façades in Fire

Transverse and Lateral Temperature Profiles of the Window-Ejected Thermal Plume along the Facade

Thermodynamic and Kinetic Characteristics of Combustion of Discrete Polymethyl Methacrylate Plates with Different Spacings in Concave Building Facades

Experimental Investigation of Water-Based Fire Suppression Systems on External Façade Fires