Abstract:A mechanical model of the spatial distribution of the mining stress field based on the structure of overburden key strata was established. The model demonstrates that the overburden rock load can be transferred to the coal and rock mass around the stope through the key strata in the fracture and bending subsidence zones. Equations for calculating the plane distributions of mining stress under the key strata at different horizons and abutment pressures on the stope were established. In coal mines, the effective extraction of relief gas and the prevention of dynamic disasters depend on accurate predictions of the spatial distribution of mining stress in the overlying rock. However, at present, the prediction of stress relief and concentration zones based on operational experience or empirical modeling differs significantly from actual measurements in the field. The fundamental problem is the difficulty in modeling the transfer mechanism of the mining overburden load under the influence of key strata. In this study, a mechanical model of the spatial distribution of the mining stress field based on the structure of overburden key strata was established. The model demonstrates that the key strata are the main bearing bodies of the overlying rock, both before and after the fracture, and the overburden rock load can be transferred to the coal and rock mass around the stope through the key strata in the fracture and bending subsidence zones, thus forming a mining stress field. Equations for calculating the plane distributions of mining stress under the key strata at different horizons and abutment pressures on the stope were established, and a spatial distribution prediction method for the mining stress field based on the overburden key strata structure was proposed. The study area was the Gaojiapu Coal Mine, where it was found that the key stratum of the 400.45 m thick Luohe Formation sandstone bore most of the overlying rock load and transferred the load to the coal and rock mass around the stope. This load distribution is the root cause of a high concentration and wide influence range of mining stresses, leading to serious deformation of the main roadway and frequent dynamic disasters. The mining stress concentration was maximized at a mining length of 1458 m × 1458 m.

A Coupled THM Model for Simulating Mechanical Response of Open Pit and Underground Stope to the Filling of the Pit

Study on Optimization of Stope Structural Parameters and Filling Scheme of Wawu Phosphate Mine in Yichang City, China

Analytical Solution for Estimating the Stress State in Backfill Considering Patterns of Stress Distribution

Evaluation of Safety and Deformation Characteristics of the Secondary Stope Sandwiched Between Backfills in Underground Iron Mines

Physical Modeling Study on Treatment of Waste Slurry with Vacuum Preloading at Bottom Combined with Upper Surcharge Loading

Numerical Simulation of Surface Subsidence and Backfill Material Movement Induced by Underground Mining

Evaluation of the Additional Stress on Adjacent Tunnel Shafts Induced by Foundation Pit Excavation

Overburden and surface subsidence with slicing paste filling mining in thick coal seams

Mechanical Analysis of the Failure Characteristics of Stope Floor Induced by Mining and Confined Aquifer

Stability analysis of a deep and large open pit based on fine geological modeling and large-scale parallel computing: a case study of Fushun West Open-pit Mine

Study on the Mechanical Relationship among the Backfilling Mining Support, Roof Rock Beam, and Gangue Filling Body in Comprehensive Mechanized Filling Mining Process

Study on the Partial Paste Backfill Mining Method in a Fully Mechanized Top-Coal Caving Face: Case Study from a Coal Mine, China

Similar simulation of overburden movement characteristics under paste filling mining conditions

Study on surrounding rock disturbance effect of multi-middle section combined backfilling mining in inclined iron ore

A Solution to Estimate the Total and Effective Stresses in Backfilled Stopes with an Impervious Base During the Filling Operation of Cohesionless Backfill

Mining stress formation and distribution: Predictive model based on overburden key strata structure

Application of double-yield model in numerical simulation of stability of mining filling body

A path for evaluating the mechanical response of rock masses based on deep mining-induced microseismic data: A case study

Ground subsidence mechanism of a filling mine with a steeply inclined ore body

Study on Deformation Response Law of Surrounding Rock in Solid Backfill Mining Stope

Simulations of goaf surface subsidence via filling control