Abstract:An extended McEvily model for fatigue crack growth analysis of metal structures is proposed in this paper. In comparing with our previous work, the extension is mainly concerned with the following two aspects: (1) the slope of the fatigue crack growth rate curve is regarded as a variable rather than a fixed value for different materials; (2) both the maximum stress intensity factor at the crack opening level, Kop,max and the effective stress intensity factor range at the threshold level, ΔKeff,th are functions of load ratio, R and they are determined by the curve fitting method. Results indicate that the value of Kop,max tends to decrease slightly as load ratio increases where crack closure is experimentally detected. According to the present data obtained through the nonlinear least squares fitting method and discussions on the experimental results in the published literature, the parameter ΔKeff,th increases with increasing load ratios where crack closure exists and decreases at high load ratios where the experimental data are closure free. In this paper, all the parameters in the extended McEvily model are assumed to be unknown in advance and they are estimated through the curve fitting method based on the experimental data. The method is also put forward to determine material constants in the crack growth rate law based on the fitting parameters under different load ratios. Comparison between the predicted results and the corresponding experimental data with different load ratios reveals that the extended McEvily model can account for the load ratio effect reasonably well. Based on our previous work this model can also be expected to explain other fatigue phenomena.

Comparison and Verification of Unified Fatigue Threshold Models

A Modified Coffin-Manson Model for Ultra-Low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality

Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

A Proposal on Ultra-Low Cycle Fatigue Damage Evaluation of Structural Steels

Interpreting Load Ratio Dependence of Near-Threshold Fatigue Crack Growth by a New Crack Closure Model

Validation of an effective stress intensity factor calculation model

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

A New Bilinear Model for Fatigue Crack Growth Evaluation

A Simple Engineering Approach in the Prediction of the Effect of Stress Ratio on Fatigue Threshold

An engineering model of fatigue crack growth under variable amplitude loading

A modification to the two driving forces model for fatigue threshold prediction

Physical description and model validation of welded joint fatigue damage evolution

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

The extended McEvily model for fatigue crack growth analysis of metal structures

A method for the evaluation of the two fatigue thresholds based on the two-parameter unified approach

Effect of Load Ratio on Fatigue Crack Growth in the Near-Threshold Regime: A Literature Review, and a Combined Crack Closure and Driving Force Approach

STUDY OF FATIGUE CRACK GROWTH THRESHOLD BASED ON TEST RESULTS

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

Probabilistic Modeling of Fatigue Crack Growth and Experimental Verification

Evaluation of Fatigue Crack Growth Curves in Existing Codes and A Proposed Modification Based on Experimental Data of Cr-Ni-Mo-V Steel Welded Joints