Abstract:Compound refractive x-ray lens is a unique device to form image of opaque object which is illuminated by x-rays. It is consisted of a lot number of placed in-line concave microlenses and works like ordinary refractive lens for visual light. In contrast to other x-ray optical devices, it could achieve satisfying resolution without complicated equipment. The spherical compound refractive x-ray lens used in this experiment is composed of 123 biconcave microlenses of 200 μm diameter. Each microlens was formed by the epoxy between two bubbles which were injected into an epoxy-filled glass capillary. There are three advantages ensuring good image quality of the lens for using in hard x-rays: (1) The epoxy (C100H200O20N, 1.08 g/cc) is composed of carbon, hydrogen and nitrogen, each of them is characterized by a low absorption coefficient for 5-30 keV x-rays. (2) Because of the nature of physics forming the bubble, the lens surface quality is extremely good. (3) The capillary makes sure that the series of unit lenses are well aligned coaxially. The lens focal length is 114 mm at 8.05 keV which is adjusted according to thick-lens analysis. X-ray images of grid mesh are compared between using a copper anode x-ray tube without filter and a synchrotron radiation source with monochromator. It could be found that the resolution and contrast are improved a lot by using monochromatic x-rays. The field of view and geometrical distortion around the edges of the field of view are reduced because of using a synchrotron radiation source. For x-ray tube as source the lens achieved a spatial resolution of 5 μm and field of view of about 700 μm. For a synchrotron radiation source, that is 3.8 μm by 2.3 μm resolution and field of view of about 316 μm by 128 μm.

Theoretical Simulation and Experiment Investigation of X-ray transmission characteristics though Square Polycapillary Slice Lens with quadratic curve

Grating-Based X-Ray Phase Contrast Imaging With a Polycapillary Semilens

Quasi-parallel X-ray microbeam obtained using a parabolic monocapillary X-ray lens with an embedded square-shaped lead occluder

Monte Carlo simulation of x-ray transmission through mono-capillaries

Experimental study on optical field distribution of the soft X-ray linear monochromator

Optimization and Simulation of Phase Contrast Imaging

A simulation imaging method for actual optical system and results analysis

Simulation of X-ray Transmission Through Mono-Capillaries by Monte-Carlo Method

Exploration of the computational model and the focusing process with a Flat Multi-channel Plate and a Curved Multi-channel Plate in the MATLAB

Simulation on in-line Fresnel diffractive phase-contrast imaging with partially coherent hard X-ray

Visibility Of Polychromatic Grating-Based X-Ray Imaging Systems Based On Wave-Optical Theories And Frequency Domain Analysis

Application of a Monolithic Polycapillary X-ray Lens in EXAFS Experiments

Phase-contrast Imaging Simulation Based on a Micro-CT System

Imaging Properties of a Spherical Compound Refractive X-Ray Lens

Theoretical Design and Computational Simulation of Flat Response X-ray Photocathode

Simulation Method of Performance of X-ray Focusing Mirror under Actual Surface State Used in FXT on Board EP Satellite

Hard X-ray optics simulation using the coherent mode decomposition of Gaussian Schell model

Simulation of an X-ray Fresnel Zone Plate with Nonideal Factors

Research on the Influence of X-ray Phase Contrast Imaging Parameters with Micro-focus Source

Experimental Verification Of Sub-Diffraction Imaging By Compensated Bilayer Of Transmission Line Metamaterials

OPTICAL SIMULATION AND ANALYSIS ON STRIP-FOCUS FRESNEL LENS