Abstract:In this work, we developed and validated two novel imaging geometries of benchtop multi-pinhole X-ray fluorescence computed tomography (XFCT) systems with Geant4 Toolkit. One of the Monte Carlo (MC) models utilized a fan beam source to illuminate a single slice of the object, a detector and a multi-pinhole collimator to image each slice's X-ray fluorescence (XRF). The other model consisted of a cone-beam X-ray source (designed as a 5 mm wide fan beam to reduce simulation time) to scan the whole object, two detectors and two multi-pinhole collimators to image the emissions. The phantom used in the simulations included four sections, each with three cone-shaped gold nanoparticle (GNP) inserts (5 mm in height, 3 mm in diameter across the top) with center-to-center distances of 4 mm, 4.5 mm and 4.86 mm. The GNPs concentration was 0.1 wt. %, 0.3 wt. %, 0.5 wt. % and 0.7 wt. %, respectively. The diameter of the multi-pinhole collimator was 1 mm. Performance was evaluated for pinhole-detector-distance (PDD) of 5 cm, 3.5 cm and 2.5 cm, and the results for different object layers and for single pinhole and multi-pinhole (9 pinholes) imaging were compared. The data showed that results worsened with decreasing GNPs insert diameters and with decreasing PDD (object-pinhole-distance was fixed). The multi-pinhole configurations performed better than a single pinhole. The detection limit for the first multi-pinhole operation was 0.21 wt. %; the second was 0.24 wt. %. Detection limits for the single pinhole were 0.32 wt. % and 0.35 wt. %, respectively. The first MC model could acquire 2D slice images of the object without rotation and the second MC model could image the 3D object efficiently. These two novel multi-pinhole systems could potentially provide a bioimaging modality for nanomedical applications.

Exploration of the computational model and the focusing process with a Flat Multi-channel Plate and a Curved Multi-channel Plate in the MATLAB

Optimization and Simulation of Phase Contrast Imaging

OPTICAL SIMULATION AND ANALYSIS ON STRIP-FOCUS FRESNEL LENS

Monte Carlo Simulation for Polychromatic X-ray Fluorescence Computed Tomography with Sheet-Beam Geometry

Phase-contrast Imaging Simulation Based on a Micro-CT System

Simulation on in-line Fresnel diffractive phase-contrast imaging with partially coherent hard X-ray

Simulation of an X-ray Fresnel Zone Plate with Nonideal Factors

Research on the Influence of X-ray Phase Contrast Imaging Parameters with Micro-focus Source

X-ray Phase Contrast Imaging and Simulation in Near Field

Analytic Physical Optics Solution for Bistatic 3D Scattering Model from Separate Plates

Focusing X-Rays with Curved Multiplate Crystal Cavity

Experimental Analysis of a Wavefront Coding System with a Phase Plate in Different Surfaces

Feasibility Simulation of 3D Benchtop Multi-Pinhole X-ray Fluorescence Computed Tomography with Two Novel Geometries

Off-Axis Imaging in Keel-Edge Pinhole Single Photon Emission Computed Tomography System Based on Monte Carlo Simulation

Monte-Carlo Simulation of Dynamic Spatial Resolution of Picosecond X-ray Framing Camera with Gated Microchannel Plate

Simulation Research of Multi-Pinhole Collimated L-Shell XFCT Imaging System

Effects of the Condenser Fractal Zone Plate in a Transmission X-ray Microscope

Study of projection line models in X-ray phase contrast CT

Plate Refractive Camera Model and Its Applications

Multiscale Modeling and Analysis for High-fidelity Interferometric Scattering Microscopy

Angular-spectrum Modeling of Focusing Light Inside Scattering Media by Optical Phase Conjugation.