Abstract:Heterogeneous nanostructured materials, including metals, alloys, and composites, have attracted significant scientific interest because of their outstanding performance in overcoming the strength-ductility trade-off, enhancing fatigue strength, and reducing friction and wear damage. In this study, we developed a new micromechanical model to predict the overall mechanical response of heterogeneous nanograined metals that consist of plastically deformable soft and hard domains. This dual-domain heterogeneous structure was modeled as a matrix-inclusion system, and the problem was solved through a secant-moduli approach that considered the existence of geometrically necessary dislocation (GND) pileups at the domain boundaries. We assumed that the inclusions are aligned along one direction according to experimental observations. A significant improvement in this development from previous micro-mechanical models was that the hetero-deformation induced extra strengthening inside the plastically deformable inclusions of different shapes due to the GND pileups was taken into account. In this process, the stress-strain responses of the constituent phases of various grain sizes that spanned over four orders of magnitude are also established by the dislocation density-based model. In accordance with Eshelby's equivalent-inclusion principle, the inclusions are taken to be of spheroidal shape, with an aspect ratio (i.e., length-to-diameter ratio, denoted by β) that could be much larger or smaller than unity. We considered in details the condition that the overall uniaxial tension is applied along the direction of the aligned inclusions, and examined the consequences if the extra strengthening is not considered and if it is considered. It is found that, if extra strengthening was not considered, the inclusion shape had a significant influence on the strain-hardening capability of the heterogeneous metals. The strain-hardening rate increased with increasing <math>β</math> if <math>β≥1</math>, whereas it decreased with increasing <math>β</math> if <math>β<1</math>, which resulted in a maximum strain-hardening rate at <math>β=100</math> and a minimum one at <math>β=0.5</math> among all the aspect ratios considered. Interestingly, the strength-ductility trade-off could be overcome by modulating only the shape of the inclusions. In contrast, if extra strengthening was incorporated, the variation of the strain-hardening rate was reversed because larger <math>β</math> (as <math>β≥1</math>) provided less strain partitioning, lower GND density, and reduced back stress, whereas bigger <math>β</math> (as <math>β<1</math>) yielded higher ones. When the overall uniaxial stress was applied normal to the direction of the aligned inclusions, the <math>β</math> dependence of the strain-hardening rate was different. Our findings showed that the tuning of inclusions shape, extra strengthening, grain sizes, and volume fractions of the inclusions circumvented the strength-ductility trade-off and achieved outstanding strength-ductility synergy as demonstrated by the strength-ductility map.

Dislocation Pile-Up Polarization Model for Mechanical Properties of Polycrystalline Metals Based on Grain Boundary Resistance Variability

Grain Boundary Dominated Plasticity in Metallic Materials

Inclination-governed Deformation of Dislocation-Type Grain Boundaries

Investigation of Grain Boundary and Orientation Effects in Polycrystalline Metals by a Dislocation-Based Crystal Plasticity Model

Dislocation-grain Boundary Interaction in Metallic Materials: Competition Between Dislocation Transmission and Dislocation Source Activation

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

Unravelling Physical Origin of the Bauschinger Effect in Glassy Polymers

Deformation-induced grain rotation and grain boundary formation achieved through dislocation-disclination reactions in polycrystalline hexagonal close-packed metals

Geometrically necessary dislocations and related kinematic hardening in gradient grained materials: A nonlocal crystal plasticity study

Grain size-dependent crystal plasticity constitutive model for polycrystal materials

Dislocation–grain boundary interaction-based discrete dislocation dynamics modeling and its application to bicrystals with different misorientations

A unified framework for polycrystal plasticity with grain boundary evolution

Intergranular fracture, grain-boundary structure, and dislocation-density interactions in FCC bicrystals

Heterogeneous lattice strain strengthening in severely distorted crystalline solids

Microstructure-based Intergranular Fatigue Crack Nucleation Model: Dislocation Transmission Versus Grain Boundary Cracking

A micromechanical model for heterogeneous nanograined metals with shape effect of inclusions and geometrically necessary dislocation pileups at the domain boundary

Polycrystal plasticity with grain boundary evolution: A numerically efficient dislocation-based diffuse-interface model

Dislocation-mediated Strain Hardening in Tungsten: Thermo-mechanical Plasticity Theory and Experimental Validation

Spatially Resolved Polarization Switching Near a Planar Defect by Design: Mesoscopic Mechanisms at Tilt Grain Boundary in Bismuth Ferrite

Constitutive modeling of the tension-compression behavior of gradient structured materials

The effect of strain rate asymmetry on the Bauschinger effect: A discrete dislocation plasticity analysis